Rechargeable batteries are becoming increasingly important for our daily life due to their strong capability of efficiently storing electric energy under chemical form. The replacement of conventional liquid electrolytes with polymer electrolytes (PEs) has been deemed as one of the most viable solutions towards safer and higher energy density electrochemical energy storage systems which are coveted for e-mobility applications (e.g., electric vehicles, EVs). In recent years, the introduction of inorganic materials into PEs has captured escalating interest, aiming at harmonizing advantages from both organic and inorganic phases. In this review, we present the progress and recent advances in PEs containing nano-sized inorganic materials, with due attention paid to the role of inorganic phases on the physical and chemical properties of the electrolytes. The paradigm shift from composite polymer electrolytes (CPEs, obtained by physical blending) to hybrid polymer electrolytes (HPEs, obtained by chemical grafting) is highlighted and the possible improvement and future directions in CPEs and HPEs are discussed.
15 March 2018 in Journal of the Electrochemical Society
Diffusion coefficients are important parameters for the characterization of new electrode materials, but they are also essential for the study of cell aging and as input parameters in battery modeling. In this report, the applicability of the galvanostatic intermittent titration technique (GITT) on commercial cells is studied. A GITT protocol is applied on a set of commercial cells with graphite anodes and various cathode materials. The cell response is then compared with the ones of the individual electrodes, obtained in three-electrode and half-cell configurations. In particular, mostly due to the particular potential profile of graphite, the full cell GITT response corresponds to the anode and cathode response at low and high state of charge, respectively. Therefore, it is possible to estimate the diffusion coefficients of the individual electrodes by a simple experiment on commercial cells, although only in limited ranges of SOC. If the experiments are performed at different temperatures, it is also possible to determine the activation energies of the diffusion coefficients. In conclusion, GITT allows an estimation of the diffusivity data in commercial cells, and can be therefore used as fast analytical tool for the study of aging and for the modeling of lithium-ion batteries.
Research and development of post lithium ion batteries is attracting considerable attention. While there have been significant advances in understanding the challenges of Li-O2(air) and Li-S batteries, the development of gas separation and ion selective membranes will be crucial in their commercialization due to their potential to separate O2 from air and impede lithium polysulfide dissolution while permitting rapid diffusion of lithium ions. In addition, research leading to novel and highly conductive and selective polymer electrolytes will be essential in overcoming the deficiencies of liquid based electrolytes in both the air and sulfur based battery systems.