Drying via solar energy is an environmentally friendly and inexpensive process. For controlled and bulk level drying, a greenhouse solar dryer is the most suitable controlled level solar dryer. The efficiency of a solar greenhouse dryer can be increased by using thermal storage. The agricultural products dried in greenhouses are reported to be of a higher quality than those dried in the sun because they are shielded from dust, rain, insects, birds, and animals. The heat storage-based greenhouse was found to be superior for drying of all types of crops in comparison to a normal greenhouse dryer, as it provides constant heat throughout the drying process. Hence, this can be used in rural areas by farmers and small-scale industrialists, and with minor modifications, it can be used anywhere in the world. This article provides a comprehensive analysis of the development of solar greenhouse dryers for drying various agricultural products, including their design, thermal modelling methods, cost, energy, and environmental implications. Furthermore, the choice and application of solar photovoltaic panels and thermal energy storage units in the solar greenhouse dryers are examined in detail, with a view to achieving continuous and grid-independent drying. The energy requirements of various greenhouse dryer configurations/shapes are compared. Thermodynamic and thermal modelling research that reported on the performance prediction of solar greenhouse dryers, and drying kinetics studies on various agricultural products, has been compiled in this study.

The demand for sustainable alternative-fuels in the transportation and agriculture domains is essential due to the quick depletion of petroleum supplies and the growing environmental challenges. The ternary-blends (diesel, biodiesel, and Methyl oleate) have the ability to report the existing challenges in this area because they offer significant promise for reducing exhaust emissions and improving engine performance. In the current work, soy methyl ester is blended with methyl oleate and diesel. The emissions and performance of blended biodiesel was conducted in common rail direct injection engine (CRDI). The characterization and physical properties were also evaluated by utilizing various methods like Fourier-Transform Infrared Spectroscopy (FTIR), UV-vis Spectroscopy (UV-vis), and Nuclear Magnetic Resonance. FTIR spectra showed the existence of the strong C=O, indicating the presence of FAME at 1745 cm⁻¹. Again, UV-vis has reported the appearance of conjugated dienes in the oxidized biodiesel. The results indicated all blended samples retained the properties of diesel. The addition of methyl oleate improved brake specific fuel consumption of blended biodiesel almost near to diesel. D50::S80:M20 produced a mean reduction in hydrocarbon 42.64% compared to diesel. The average carbon monoxide emission reduction for D50::S80:M20 was 49.36% as against diesel.

The impact of single-slope solar still with and without flat-plate collector was evaluated experimentally and numerically. Experimental analysis was conducted for four different water depths (3, 6, 9, 12 cm) in on-sunshine hours between 11 AM to 5 PM in Bhopal (23.2599° N, 77.4126° E), India. The thermo efficiency was 51.31% for 3 cm water depth while 24.29% for 12 cm water depth in an active mode of operation. In the case of passive mode, the thermo efficiency was 17.02% for 3 cm water depth and 6.77% for 12 cm water depth. The average exergy efficiency of single-slope solar still is 66.60% for 3 cm depth which is higher than 12 cm depth, i.e., 23.14%. The hourly variation parameters of solar still were also calculated and analyzed. The overall results obtained in the analysis state that solar still performs effectively when coupled with a flat-plate solar collector. According to econometric evaluation, the fabrication expense of a single-slope solar-basin-still is 126.43$ whereas the cost of producing distilled water per day is 1.61$, and the payback period of a single-slope solar-basin-still with FPC is 17.53 months. In a nutshell, the single-slope solar-basin-still design is commercially viable, functional, and technically sustainable, minimizing manufacturing costs in comparison with a traditional solar still, and past findings. The proposed solar still produced remarkable results in all experimental trials.

This article presents a comprehensive study on thermal and computational fluid dynamics (CFD) analysis of an innovative greenhouse dryer designed for passive operation under a no-load condition. The dryer incorporates hybrid thermal storage at the floor and a reflective mirror with thermocoal as the north wall, transforming a classical even-span greenhouse dryer into an efficient and effective system. The experimentation was conducted under clear sky conditions, with variations in global solar radiation (GSR) ranging from 166.6 to 1209 W/m², resulting in an average value of 875.9 W/m². The variations in GSR influenced other ambient parameters, including ambient temperature (28.7 °C to 35.6 °C), ambient relative humidity (33.2% to 45.7%), and ambient wind speed (0.1 to 1.02 m/s). Indoor parameters of the proposed dryer, such as inside temperature (31 °C to 47.35 °C), inside relative humidity (31.1% to 39.1%), ground temperature (44.2 °C to 70.6 °C), and outlet temperature (29 °C to 45.35 °C), were measured hourly. The average values of these parameters were 41.25 °C, 35.31%, 61.65 °C, and 39.25 °C, respectively. Quantitative parameters, including heat loss, overall heat transfer coefficient, coefficient of diffusion, and instantaneous efficiency, were calculated to evaluate the dryer’s performance. The proposed dryer exhibited an improved range of overall heat transfer coefficients (3.87 to 5.03 W/m² K) compared to the modified greenhouse dryer under passive mode and the conventional greenhouse under passive mode. CFD analysis provided temperature distribution plots showing a progressively increasing range of temperatures near the trays, ranging from 310 K to 335 K, suitable for natural convection drying. The findings highlight the superior performance of the innovative dryer compared to contemporary systems. This research contributes to the advancement of drying technology and holds potential for applications in the agriculture and food processing industries.