Viktoria Ferencsik

Dr. Viktoria Ferencsik

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2022 in Machines
Verified
Journal Article
Open access
PDF file
VFViktoria Ferencsik
Viktoria Ferencsik
GVGyula Varga
Gyula Varga
This study describes the determination and optimization of burnishing process parameters and their effects on surface roughness of EN AW-2011 aluminium alloy workpieces. The process has a low environmental load and the chip-free burnishing process improves the integrity of the machined surface, but to achieve this, the different burnishing parameters, for example, burnishing force, feed rate, speed and number of passes, must be properly defined according to the material of the workpiece. In our research, a full factorial experimental design method is used to plan and carry out the experiments and to determine the most appropriate parameter range for this material quality.

21 November 2023 in Cutting & Tools in Technological System
Verified
Journal Article
Open access
PDF file
VFViktoria Ferencsik
Viktoria Ferencsik
In the last decade, ensuring the highest possible surface quality of manufactured parts has been given a major priority, so more and more emphasis is being placed on the examination and development of finishing treatments that can effectively ensure increasingly stringent surface roughness. For this purpose, diamond burnishing - which is a widely used cold plastic technology - can be used productively as it can improve the surface roughness of the material. But even though due to the development of engineering technology, new possibilities and methods are constantly being developed to examine individual material structure changes, the ability to plan the surface roughness is very difficult. This paper focused on the determination of theoretical roughness to establish a mathematical model that can predict and analyse the relationship between experimental process parameters and surface roughness parameters. To validate the model, real experiments were performed, where the surface roughness were measured before and after the application of burnishing process on low alloyed aluminium shaft pieces.

30 November 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
GVGyula Varga
Gyula Varga
VFViktoria Ferencsik
Viktoria Ferencsik
Cold plastic procedures such as surface burnishing play an important role in lifeenhancing machining methods. Application of this process the surface roughness improves, shape correctness also changes and the increases lifetime due to the compressive residual stress remains in subsurface are of the workpiece. This article deals with the change of these attributes and the correlation of these with the burnishing parameters: burnishing speed, feed rate, burnishing force and number of passes on diamond burnished low alloyed aluminium shafts. The experiments were executed by the Taguchi type full factorial experimental design method, the measurements of the cylindricity of the specimens were done with a circularity and position error machine while the measurement of residual stress was performed by X-ray diffraction method. The aim of this study is to define the appropriate range of technological parameters which result high improvements.

Verified
Journal Article
Open access
PDF file
VFViktoria Ferencsik
Viktoria Ferencsik
Characterization of surface integrity is possible with three critical metrics: microstructure, surface roughness, and residual stress. The latter two are discussed in this paper for low-alloyed aluminum material quality. Ball burnishing is a regularly used finishing procedure to improve surface roughness, shape accuracy, and fatigue life, taking advantage of the fact that it can favorably influence the variation in stress conditions in the material. The effect of burnishing is investigated using finite element simulation with DEFORM 2D software using the real surface roughness of the workpiece. The FEM model of the process is validated with experimental tests, the surface roughness is measured using an AltiSurf520 measuring device, and the residual stress is analyzed with a Stresstech Xstress 3000 G3R X-ray diffraction system (Stresstech, Vaajakoski, Finland). The results indicate that the burnishing process improves the surface roughness and stress conditions of AlCu6BiPb low-alloyed aluminum, and the study shows that there is good agreement between the FE and experimental results, further revealing the effect of the process parameters on the distribution of the compressive residual stress.

15 June 2024 in Cutting & Tools in Technological System
Verified
Journal Article
Open access
PDF file
VFViktoria Ferencsik
Viktoria Ferencsik
The article is aspected to the finite element modelling of stress in subsurface layer of aluminium alloy workpiece during diamond burnishing process. This cold forming process is a simple, cost-effective finishing method that can be used to improve surface integrity and provide compressive residual stress. Available with these, durability and quality enhancement of the components can be reached, but improperly chosen burnishing parameters can distort the efficiency of the plastic deformation process. In order to optimize this, a 2D FEM model is created including the real surface integrity of the workpiece which was measured with AltiSurf 520 surface roughness measuring device. The method is simulated using DEFORM-2D software, corresponding to the numerical values of burnishing parameters implemented in practice as well, thereby allowing a comparative analysis with the results of X-ray diffraction measurement.

15 December 2023 in Multidiszciplináris tudományok
Verified
Journal Article
Open access
PDF file
VFViktoria Ferencsik
Viktoria Ferencsik
As a result of the development of engineering technology, new opportunities and methods are constantly being developed to examine individual material structure changes, but most of these are impossible to implement on a low budget. Tests carried out with finite element simulations enable the optimization of machining processes and the reduction of experimental costs. The paper discusses the modelling of burnishing process that can effectively reduce surface roughness and the effect of burnishing force on average surface roughness. The machining is simulated using DEFORM-2D software, corresponding to the values of the experimental parameters (burnishing force, feed, speed) implemented in practice, allowing a comparative analysis of the material quality of low alloyed aluminium.