Dynamic response characteristics of solenoid valves directly determined their performances. Among numerous parameters, the influence of magnetic isolation ring (MIR) on solenoid valve performance is crucial. Previous optimization studies have not conducted a systematic exploration and analysis of MIR. In this paper, a model of an AC solenoid valve considering the position of the MIR is proposed, and the model’s accuracy was verified by simulation and experiments. The electromagnetic force, response time, and magnetic field distribution at different positions of the MIR were analyzed, and the effect of the position of MIR on dynamic response characteristics of the solenoid valve was clarified. The results show that the MIR affects the dynamic response characteristics of the solenoid valve by changing the magnetic circuit. With the positive translation of the position of the MIR along the Z-axis, the electromagnetic force first increases and then decreases, and the response time first decreases and then increases. The position range of MIR with excellent dynamic response performance was obtained from the comprehensive consideration of response time and electromagnetic force. Finally, the optimization design for the dynamic response performance of the solenoid valves is realized.
10 September 2024 in International Journal of Structural Integrity
Purpose: In order to improve the efficiency and reliability of simulation analysis for composite riveting structures in engineering products, a comparative study was conducted on different forms of riveting simulation methods.Design/methodology/approach: Five different rivent simulation models were established using the finite element method, including rigid element CE, flexible element Rbe3 and beam element, and their results were future compared and analyzed.Findings: Under the given technical parameters, the simulation method of Rbe3 (with holes) + beam can meet the analysis requirements of complex engineering products in terms of the rationality of rivet load distribution, calculation error and relatively efficient modeling.Originality/value: This study proposes a simulation method for the riveting structure of carbon fiber composite materials for engineering applications. This method can satisfy the simulation analysis requirements of transportation vehicles in terms of modeling time, computational efficiency and accuracy. The research can provide technical support for the riveting process and mechanical analysis between carbon fiber composite components in transportation products.
Bearings are widely used in the industry due to their ability to support the movement of rotating bodies. The spacer rings are a key component of double-row roller bearings; therefore, the characteristics and properties of the spacer rings have a significant impact on the bearing functions. However, the lack of the characteristics and performance analysis of the spacer ring limits the improvement of bearing performance. To analyze the characteristics of spacer rings and establish a basis for improving their performance, a new testing method for the characteristics and performance of the spacer ring was presented and corresponding experiments were developed. The test procedure entails the evaluation of basic characteristics, surface properties, and serviceability. Basic characteristics were determined through element testing and cross-section morphological observation; surface properties were assessed through surface morphology and surface roughness detection; and serviceability was identified by cross-section hardness and frictional wear tests. The results show that the proposed test method can comprehensively characterize the performance of the spacer rings. The spacer ring composition mainly contains Fe, Al, P, Si, Ca, and S, which contribute to excellent wear resistance, hardness, strength, and corrosion resistance. The cross-sectional morphology exhibits porous characteristics, which enhance lubricity. In terms of surface property, the surface of the spacer ring is relatively flat, and the surface roughness is generally less than 0.6 μm Sa. The average friction coefficient is 0.85, and the friction and wear properties of the spacer ring are good. This study contributes to establishing the testing and evaluation criteria for the performance of spacer rings in engineering, which helps to improve the performance of bearings.
Reliable traffic-speed forecasting requires local and temporal dependence to be modeled under consistent evaluation. This study presents an Improved Dung Beetle Optimizer (IDBO)-selected convolutional–recurrent temporal self-attention network for direct three-location forecasting. Separate models predict 5, 15, and 30 min speeds from synchronized 60 min histories in the Caltrans Performance Measurement System (PeMS) freeway and Harbin urban-road case studies. IDBO combines stagnation-triggered Lévy perturbation and adaptive weighting to select convolutional filters, recurrent units, and attention heads using a shared six-task validation objective. Chronological evaluation includes nine forecasting methods, five final runs, paired inference, matched-budget search comparisons, context controls, and ablations. The proposed configuration achieves the lowest three-location macro root mean square error (RMSE), mean absolute error, and denominator-bounded mean absolute percentage error (ε-MAPE, with ε = 5 km/h) among the nine benchmark methods in all six tasks. Relative to Transformer, RMSE reductions are 13.97–14.42% on PeMS and 12.79–13.08% on Harbin; reductions relative to its capacity-matched counterpart are 7.55–7.92% and 6.66–7.24%, respectively. All twelve paired comparisons remain significant after separate six-task Holm adjustments for the two comparators. IDBO achieves the lowest mean normalized search endpoint and area under the curve under the common query budget. The network uses 240,387 parameters and 2,804,672 analytical multiply–accumulate operations per sample, documenting the accuracy–complexity trade-off.