In this study, linear quadratic Gaussian (LQG) control is used for designing a wide area damping controller (WADC) in power system. The designed continuous and discrete mode LQG‐based WADC is robust enough to deal with the problem of imperfect communication medium. The imperfect communication medium includes process noise, measurement noise, packet drop‐out and signal latency in the remote control signal. The appropriate control input and the controller location are selected using the modal residue method. The imperfections in the communication network are modelled using Pade approximations for time delay and by inserting Gaussian random noise. Using two typical test power systems, the performance of robust LQG‐based WADC as a power system stability agent is assessed in the frequency domain and via time‐domain simulation of the non‐linear model on MATLAB/Simulink and DIgSILENT software platform. Finally, a real‐time implementation of the designed WADC is demonstrated on the Opal RT‐Lab real‐time digital simulator.
In interconnected modern power systems, renewable energy sources, HVDC transmission lines, and energy storage devices are growing after being installed globally with development in power electronics and communication technology. Low-frequency inter-area oscillations (0.2–0.8 Hz) have a severe influence on the operation of an interconnected power system due to the numerous generators. This paper provides a comprehensive literature review of the wide-area measurement system-based wide-area damping control systems with operational uncertainties, including signal communication effects, such as time delay, packet loss, noise, and disorder, , on damping control performance. Different wide-area damping control techniques are investigated, emphasizing their advantages inadequacies and categorized according to vital features. In recent years, the resilience of wide-area damping control systems to cyber-physical attacks has recently been brought back to the researcher’s consideration because of the opportunities produced by information-communication technologies and the renewed interest in installing renewable energy sources. This paper provides recent developments in methods of damping performance enhancement that deserve further study in cyber-physical power systems. Overall, the present study is helpful for academicians and researchers to identify the objectives in the area of cyber-physical power systems to enhance the wide-area damping performance.
1 December 2016 in IET Generation, Transmission & Distribution
A conceptual design methodology is proposed for event‐triggered based communication for wide‐area damping controller in power systems. The event‐triggering mechanism is adopted to reduce the communication burden between the origin of the remote signal and the wide‐area damping controller (WADC) location. The remote signal is transmitted to the WADC only when an event‐triggering condition based on a predefined system output, is satisfied. The triggering condition is derived from a stability criterion, and is monitored continuously by a separate event‐monitoring unit located at the origin of the remote signal. The stability of the resulting closed‐loop system is guaranteed via the input‐to‐state stability technique. The proposed event‐triggered WADC is implemented on two typical test power systems – two area four machine and IEEE 39‐bus 10‐machine. The validation of proposed mechanism is carried out through non‐linear simulation studies on MATLAB/Simulink platform. The numerical results show the efficacy of the controller in managing the communication channel usage without compromising the stated system stability objectives.
7 August 2023 in Iranian Journal of Science and Technology, Transactions of Electrical Engineering
In this article, the concept of periodic output feedback is used to design a discrete mode wide-area damping controller using different sets of input and output sampling time intervals. The optimal periodic output feedback controller gain matrix along with the optimal sampling time intervals are obtained using the particle swarm optimization technique. The periodic output feedback based controller is designed for two typical test power systems—a two-area four-machine and the IEEE 39-bus 10-machine systems—with various sets of input and output sampling time intervals. The effectiveness of the periodic output feedback based wide area damping controller has been validated through non-linear simulation studies and eigenvalue analysis in the presence of signal latency. Finally, the recommended optimum input and output sampling period is also provided at the end of the article.
19 August 2023 in Journal of Electrical Engineering & Technology