A tunable stiffness and damping vibration isolator based on magnetorheological elastomers (MREs) is developed. In this isolator, four MRE elements are used as the tunable springs, whose stiffness can be controlled by varying the magnetic field. A voice coil motor, which is controlled by the relative velocity feedback of the payload, is used as the tunable damper of the isolator. Under the combined ON–OFF control, the proposed vibration isolator shows satisfying isolation effect. The experimental results indicate that the responses of the payload are suppressed significantly in comparison to the passive system. The transmissibility of the payload around the resonant frequency is decreased by 61.5%. The root mean square (RMS) value and the maximum value of the displacement responses of the payload are decreased by 36.0% and 50.0%, respectively. In addition, the RMS values and maximum values of the velocity responses are decreased by 45.4% and 52.5%, respectively.
A digital holographic interferometry was applied to analyze the morphology transformation of the magnetorheological elastomer, and both the contraction and stretch deformation were observed under applying an external magnetic field on the sample. Both isolated particles and grouped particles were observed in the magnetorheological elastomer sample, and these two kinds of particles resulted in the concave-convex deformation of the sample. The deformation of magnetorheological elastomer was calculated by using a 2D finite element model, and the results agreed well with the experimental analysis.
16 February 2012 in Industrial & Engineering Chemistry Research
This paper presents a phase based stiffness tuning algorithm to overcome the uncertainty of the relation between the magnetic current and the natural frequency for magnetorheological elastomer (MRE) dynamic vibration absorbers (DVA) caused by the nonlinearity of the MRE. The phase difference of the relative acceleration of the DVA mass and the absolute acceleration of the primary system was used to check whether the natural frequency of the DVA is adjusted to the excitation frequency. The magnetic current was controlled by the phase difference, which made the proposed algorithm not rely on the model of the MRE DVA. Both the simulation and the experiment demonstrate that the proposed algorithm is efficient for MRE DVA in rapidly tracking the excitation frequency.