This paper considers mathematical modeling and optimization of the technological process for obtaining functional Mo-Se thin films by the electrochemical method. The study is carried out by potentiodynamic, potentiostatic, and galvanostatic methods, under various conditions on Pt and Ni electrodes. The mathematical calculations are performed in a software package using software specially developed for this process. The optimal electrolysis mode and electrolyte composition for the codeposition process are chosen by studying the effects of various factors (the concentration of the initial components, temperature, current density, etc.). A statistical analysis of the resulting regression equation is carried out, the average approximation error is calculated, and the standard deviation is estimated. To evaluate the constructed multiple regression equation, Fisher’s test is calculated and the regression coefficients are estimated. The resulting regression equation determines the electrolyte content and electrolysis conditions, which allows the deposition of the Mo-Se alloy containing the required amount of Mo.
8 December 2019 in Journal of Electrochemical Science and Engineering
The present contribution is devoted to the electrochemical deposition of Sb2Se3 thin films from tartrate electrolyte. The study was conducted by potentiodynamic, potentiostatic and galvanostatic methods carried out under different conditions at Pt, Cu and Ni electrodes. The kinetics and mechanism of the electroreduction of antimony and selenite ions in the tartaric acid were studied separately for the electrochemical deposition. Comparison of the obtained polarization curves showed that co-deposition occurs between electroreduction potentials of antimony and selenium, indicating depolarization electrode effect for antimony ions. The influence of electrolyte composition, pH, current density, temperature, etc. has been studied. On the basis of cyclic polarization, X-ray phase and SEM-EDX analyses, it is found that Sb-Se thin films are deposited on Pt and Ni electrodes, but not on Cu electrode. Black, uniform, crystalline and shiny films of the stoichiometric composition of Sb2Se3 compound are deposited on Pt and Ni electrodes within the 338-348 K temperature interval, pH 1.85, current density of 2.5-3.0 A/dm2, and annealing temperature of 703 K. Experiments were carried out using the optimal electrolyte composition containing 0.05 M SbOCl + 0.05 M H2SeO3 + 0.007 M C4H6O6.
The electrochemical reduction of iron (III) ions into zero-valent iron from a solution of ethylene glycol was accomplished. The kinetics and mechanism of the electroreduction process were investigated by cyclic and linear polarization techniques. The influence of temperature, potential sweep rate, and concentration of iron (III) ions on the electroreduction process was also studied. The observed values of effective activation energy revealed that the investigated electroreduction process is accompanied by mixed kinetics control. Moreover, the results of SEM and X-ray diffraction analysis confirmed the deposition of thin Fe films under the optimized conditions.