Ternary CuxZnyAlz catalysts were prepared using the hydrotalcite (HT) method. The influence of the atomic x:y:z ratio on the physico-chemical and catalytic properties under CO2 hydrogenation conditions was probed. The characterization data of the investigated catalysts were obtained by XRF, XRD, BET, TPR, CO2-TPD, N2O chemisorption, SEM, and TEM techniques. In the “dried” catalyst, the typical structure of a hydrotalcite phase was observed. Although the calcination and subsequent reduction treatments determined a clear loss of the hydrotalcite structure, the pristine phase addressed the achievement of peculiar physico-chemical properties, also affecting the catalytic activity. Textural and surface effects induced by the zinc concentration conferred a very interesting catalyst performance, with a methanol space time yield (STY) higher than that of commercial systems operated under the same experimental conditions. The peculiar behavior of the hydrotalcite-like samples was related to a high dispersion of the active phase, with metallic copper sites homogeneously distributed among the oxide species, thereby ensuring a suitable activation of H2 and CO2 reactants for a superior methanol production.
1 June 2021 in Journal of Industrial and Engineering Chemistry
The direct hydrogenation of CO 2 into dimethyl-ether (DME) has been studied in presence of zeolite-based hybrid catalysts, prepared through gel-oxalate coprecipitation of copper, zinc and zirconium precursors (in an atomic ratio of 60 : 30 : 10 respectively) in a solution containing different home-made zeolites (i.e., Sil-1, MFI, Y, FER, BEA, MOR), for a final CuZnZr/zeolite weight composition of 1:1. All the samples were properly characterized with different techniques for determining the textural, structural and morphological nature of the catalytic surface. N 2 physisorption highlighted a variation both in the specific surface area and in the pore size distribution from the parent zeolites to the hybrid catalyst. TEM analyses disclosed how the pre-formed zeolite architecture affects the distribution of the oxides on the surface, significantly controlling not only the activity-selectivity pattern under the adopted experimental conditions ( TR , 200–260°C; PR , 30 bar, GHSV: 8.800 N L/kg cat /h), but also the catalyst stability during time on-stream.