This paper presents a new kind of vectorial backstepping sliding mode control (BSMC) for the positioning and trajectory tracking of an autonomous robotic airship. Also, a unified framework basis for the design/analysis of vectorial BSMC, as well as sliding mode control (SMC) and backstepping control (BS) for a system in lower triangular block form is derived. The design framework makes it easier the theoreticalbased comparative analysis of performances/robustness between the three nonlinear control approaches. Simulation results for the positioning and tracking of the autonomous airship illustrate the proposal.
Good state and wind estimation is a requirement for the development of guidance and control techniques for airships. However, usually this information is not directly available from the airship sensors. The typical solution applies filtering, estimation and sensor fusion methods. This paper presents a comparative study, evaluating three solutions for the state estimation of NOAMAY airship. We also present alternative versions for the crucial estimation of the wind velocity, combining Kalman filters with a data-driven Neural Network. Finally, we present special solutions to usual problems encountered in filtering implementation as the mitigation of delays caused by second-order filters. The sensors set considered is composed of a global positioning system, an inertial measurement unit and a one-dimensional Pitot probe. Comparative simulation results are presented with the use of a realistic nonlinear model of the airship.
29 June 2020 in IEEE Transactions on Aerospace and Electronic Systems
This paper presents an optimal guidance approach for a UAV navigation between two given points in 3D considering the wind influence. The proposed cost function to be minimized involves the weighting of the travel time and the control energy. An analytical expression is derived for the optimal cost yielding a fourth order polynomial whose positive real roots correspond to the optimal travel times. The optimization problem is shown to be equivalent to the Zero-Effort-Miss/Zero-Effort-Velocity (ZEM/ZEV) optimal guidance approach for the case of a constant wind acceleration. Case studies for the rendez-vous and the intercept problems are shown through simulation examples for different wind conditions.
This paper proposes a new kind of airship actuator configuration for surveillance and environmental monitoring missions. We present the design and application of a six-propeller electrical airship (Noamini) with independent tilting propellers, allowing improved and flexible maneuverability. The vehicle has different combinations of differential propulsion and can be used in a two-, four- or six-motor configuration. We developed a high-fidelity airship simulator for the Noamini airship, which was used to test and validate a control/guidance approach. Incremental Nonlinear Dynamic Inversion (INDI) is used for the velocity/attitude control to follow a high-level L1 guidance reference in a simulated waypoint-tracking mission with wind and turbulence. The proposed framework will be soon implemented in the onboard control system of the Noamini, an autonomous airship for environmental monitoring and surveillance applications.
Traditional Visual SLAM systems, like ORB-SLAM3, often lose accuracy in dynamic environments. This work presents YOLO11-ORB-SLAM3, an enhancement to ORB-SLAM3 for dynamic scenarios, which integrates a YOLO11-based instance segmentation module to detect and exclude dynamic features from the tracking process. The system is designed to work with stereo and RGB-D cameras, and its performance was evaluated on challenging dynamic sequences of the public TUM RGB-D dataset, and also through real-world experiments on a mobile robot using a stereo camera to highlight its robustness and viability for real robotic applications. Experimental results demonstrate that the proposed system outperforms the original ORB-SLAM3, reducing the error by 93% in the public TUM dataset while preserving computational efficiency.