This work presents a detailed analysis of the susceptibility of LoRa communications in the presence of intentional jamming signals. The analysis is performed with a periodic frequency-sweeping intentional electromagnetic interference, corresponding to the most common jamming signals. Such a waveform faithfully represents the signals emitted by commercial jammers. As the sweep period of the jamming signals may vary from one such device to another, the analyses are conducted with different sweep period values, from to . The experimental results indicate that the impact varies significantly according to the sweep period of the jamming signal. The detailed analysis allows us to identify the jamming signals to which LoRa communications can be resilient or not as well as to identify which LoRa channels are less affected during an attack.
24 August 2023 in IEEE Transactions on Electromagnetic Compatibility
A growing number of wireless communication systems are being installed on trains to improve safety and passenger comfort. However, most communication antennas are located on the roof of the train, close to the aerial supply lines and the pantograph–catenary interface. Due to the recurrent loss of contact at this interface, a high difference of potential inevitably generates frequent electric arcs, resulting in transient radiated electromagnetic disturbances sensed by the communication antennas. In a context where the railway industry is looking for new wireless technologies to replace the existing ones, an essential criterion for choosing one technology over the other is the resistance to the transients generated by the pantograph–catenary contact. In this article, we propose a test methodology that fills a gap in the electromagnetic compatibility literature since the immunity test standards are mainly dedicated to product validation and not to the evaluation of communication systems. Our methodology has been evaluated through experiments based on a common resilience metric that allows comparison between two different communication systems used in railways: LTE and LoRaWAN.
This paper explores how much detailed an automotive electric system geometry can be to optimize simulation computational effort. For this purpose, simulations related to two kinds of analysis - crosstalk and external radiated disturbance - have been run through a Finite Element Method (FEM) based software and a Circuit Theory based one. Crosstalk simulated signals in time domain have been statistically compared with an inside vehicle measurement. Different complexity models have been tested in this correlation process. This procedure has been used to verify automotive geometric models' accuracy for a certain frequency range. The main goal is to verify the computational savings by using some techniques and suppressing some negligible details of car's geometry.
For the last two decades, electro-electronic components have become more and more integrated into automotive vehicles, with an increasing importance in essential functions implying the safe overall operation of the car. Although these innovations come as a car performance improvement, it can also have adverse effects (some related to safety) in case of malfunction. These undesirable behaviors can be caused by Electromagnetic Interferences (EMI), and the probability increases when a large number of electro-electronic components act together in the same environment, causing failures that may damage part or the whole system. In Brazil, the Electromagnetic Compatibility (EMC) validation of these systems is currently a relative option and the decision of testing or not (and how deep) is up to each car manufacturer. Moreover, most of these validations are still realized out of Brazil, turning developments more expensive, more time-consuming and underusing Brazilian metrology chain. This paper proposes a study of the Brazilian automotive EMC validation context and a comparison with the worldwide scenario, taking into account its technical, economic and social impacts and bringing arguments to discuss a possible federal regulation. This electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet.
The characterization of electromagnetic devices commonly demand isolated environments with specific features, e.g. anechoic chambers. Nevertheless, the implementation cost of such structures is usually high and hence its availability is not always possible in the context of a research laboratory. This work proposes a methodology to find optimally configurated test setups for antennae characterization in open environments. Experimental and computational results indicate that the proposed methodology has the potential to provide the engineer a better understanding and control of the uncertainties levels associated with an antenna gain estimation setup.