Wei,Ming Huang

Mr. Wei,Ming Huang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2023 in Coatings
Verified
Journal Article
Open access
PDF file
TWTian-Chiuan Wu
Tian-Chiuan Wu
WHWei,Ming Huang
Wei,Ming Huang
Teen-Hang MeenTeen-Hang Meen
Teen-Hang Meen
Jenn-Kai TsaiJenn-Kai Tsai
Jenn-Kai Tsai
A simple and low-cost fabrication method of dye-sensitized solar cells (DSSCs) was developed to improve the structure and performance of the photoanode with the pressed layer and compact TiO2 thin film using spin coating, screen printing, and mechanical compression. In this study, four different TiO2 layers were adopted to fabricate photoanodes: a mesoporous TiO2 nanoparticles (NPs) layer, a pressed TiO2 NPs layer, a mesoporous TiO2 NPs layer on the TiO2 compact thin film, and a pressed TiO2 NPs layer on the TiO2 compact thin film. The compact thin film was deposited on the fluorine-doped tin oxide (FTO) glass via spin coating, while the mesoporous TiO2 NPs layer was deposited via the screen-printing method. The pressed TiO2 NPs layer was produced by compressing the mesoporous TiO2 NPs layer with a hydraulic press machine. When using the pressed TiO2 NPs layer for the photoanode of DSSC, the power conversion efficiency of DSSC was enhanced the most. The electron lifetime for DSSC with photoanodes based on the pressed TiO2 NPs and mesoporous TiO2 NPs layers were 8.217 and 6.287 ms, respectively. The power conversion efficiency of DSSC with photoanodes based on the pressed TiO2 NPs layer was 5.4%, while that based on the mesoporous TiO2 NPs layer was 4.08%. DSSC with photoanodes based on the pressed TiO2 NPs layer showed a significant increase in the power conversion efficiency by 36.16% compared to that based on the mesoporous TiO2 NPs layer.

29 February 2024 in Coatings
Verified
Journal Article
Open access
PDF file
TWTian-Chiuan Wu
Tian-Chiuan Wu
WHWei,Ming Huang
Wei,Ming Huang
Jenn-Kai TsaiJenn-Kai Tsai
Jenn-Kai Tsai
CCCheng-En Chang
Cheng-En Chang
Teen-Hang MeenTeen-Hang Meen
Teen-Hang Meen
Owing to its contribution to carbon emission reduction, green energy has received widespread attention. Among green energy sources, solar energy is regarded as the most important. In solar energy production, dye-sensitized solar cells (DSSCs) have been favored owing to their characteristics of simple manufacturing and high efficiency as a third-generation solar cell technology. DSSCs are prospective candidates for powering indoor Internet of Things (IoT) devices. In this study, to find a method to enhance DSSCs’ efficiency, the advantages and disadvantages of the screen printing method and the mechanical pressing and annealing method were analyzed. Using an improved method, a TiO2 photoanode was processed and annealed, and the DSSCs with the photoanode showed an efficiency increase from 1.10 to 4.78%.

4 December 2025 in Coatings
Verified
Journal Article
Open access
PDF file
Jenn-Kai TsaiJenn-Kai Tsai
Jenn-Kai Tsai
LLLi-Jung Liu
Li-Jung Liu
YLYu-Jie Liao
Yu-Jie Liao
WHWei,Ming Huang
Wei,Ming Huang
TWTian-Chiuan Wu
Tian-Chiuan Wu
Teen-Hang MeenTeen-Hang Meen
Teen-Hang Meen
Dye-sensitized solar cells (DSSCs) are considered a prospective alternative to silicon-based solar cells due to their lower production cost and simpler fabrication process than conventional solar cells. DSSCs’ adjustable optical properties enable them to function effectively under diverse illumination conditions, making them ideal for powering small electronic devices in indoor environments. In DSSCs, silver nanoparticles (AgNPs) are incorporated into titanium dioxide (TiO2) photoanodes due to their localized surface plasmon resonance (LSPR) effect, which enhances scattering and absorbing incident light and creates a strong electromagnetic field near the surface. There are diverse manufacturing methods for DSSCs, while the screen printing method is preferred because the area of the TiO2 film can be easily customized to effectively reduce human error and make the film highly stable. In this study, eight different stacked DSSC film structures were fabricated by adding AgNPs to TiO2 films. The TiO2 paste with a concentration of 3 mwt% (percentage by mass) of AgNPs performed best in this study. The photovoltaic performance was evaluated using power conversion efficiency (PCE), and the results showed that the AgNP-doped film on the surface of the fluorine-doped tin oxide (FTO) glass significantly improved the photovoltaic performance. The three layers of TiO2 doped with AgNPs achieved the highest PCE. PCE was increased since the TiO2 film containing AgNPs became thicker and closer to the FTO substrate. The PCE of DSSCs was compared using pure TiO2 NPs and the AgNP-doped TiO2 photoanode. The efficiency increased from 5.67% to a maximum of 6.13%. This enhanced efficiency, driven by LSPR and improved electron transport, confirms the viability of screen-printed, plasmon-enhanced photoanodes for high-efficiency DSSCs.