In the present work, the formation of zinc whitlockite via a dissolution–precipitation process was investigated in detail. The influence of medium pH, reaction time, temperature and concentration of precursors on the formation of the material was studied.
Perovskite-type La:BaSnO3 (LBSO) has been drawing considerable attention due to its high electron mobility and optical transparency. Its thin film electrical properties, however, remain inferior to those of single crystals. This work investigates the thermal post-treatment process of films deposited using the metalorganic chemical vapor deposition method to improve the electrical properties of different stoichiometry films, and demonstrates the modification of thin film’s structural properties using short and excessive annealing durations in vacuum conditions. Using vacuum post-treatment, we demonstrate the improvement of electrical properties in Ba-rich, near-stoichiometric, and Sn-rich samples with a maximum electron mobility of 116 cm2V−1s−1 at r.t. However, the improvement of electrical properties causes surface morphology and internal structural changes, which depend on thin film composition. At temperatures of 900 °C–1400 °C the volatile nature of LBSO constituting elements is described, which reveals possible deterioration mechanisms of thin LBSO air. At higher than 1200 °C, LBSO film’s decomposition rate increases exponentially. Thin film structure evolution and previously unreported decomposition is demonstrated by Ba and La diffusion to the substrate, and by evaporation of SnO-SnOx species.
18 September 2024 in Journal of Materials Chemistry C
Eu-doped M 3 MgSi 2 O 8 compounds (M = Ca, Sr, Ba) exhibit reversible photochromism with distinct color changes due to charge transfer in electron centers. These materials show potential for rewritable media and anti-counterfeiting applications.
Yttrium manganite (YMnO3) is a compound belonging to the hexagonal rare earth manganites family, which demonstrates multiferroic properties. This material can be prepared by several synthetic approaches, with the most common one being the solid-state synthesis. In this work, we show a possibility of preparing this material via molten salt synthesis using the NaCl-KCl mixture as the reaction medium and yttrium and manganese nitrates as the starting materials. We demonstrate that, by varying the reaction temperature and the nitrates-to-chlorides ratio, it is feasible to synthesize hexagonally shaped particles of microscopic dimensions. A similar synthesis procedure can be successfully applied for the preparation of other hexagonal manganites—ErMnO3, TmMnO3, and YbMnO3.