Hybrid manufacturing has become particularly attractive for refurbishing of high-value freeform components. Components may experience unique geometric distortions and/or wear-driven material loss in service, which require the use of part-specific, adaptive repair strategies. The current work presents an integrated adaptive geometry transformation method for additive/subtractive hybrid manufacturing based on rigid and nonrigid registrations of parent region material and geometric interpolation of the repair region material. In this approach, rigid registration of nominal part geometry to actual part geometry is accomplished using iterative alignment of profiles in the parent material. Nonrigid registration is used to morph nominal part geometry to actual part geometry by transformation of the profile mean line. Adaptive additive and subtractive tool paths are then used to add material based on constant stock margin requirements, as well as to produce blend repairs with smooth transition between parent and repair regions. A range of part deformation conditions due to profile twist and length changes are evaluated for the case of a compressor blade/airfoil geometry. Accuracy of the resulting adaptive geometry transformation method were quantified by (1) surface comparisons of actual and transformed nominal geometry and (2) blend region surface accuracy. Performance of the adaptive repair strategy relative to a naïve strategy is evaluated by the consideration of material efficiency and process cycle time. It is shown that the adaptive repair strategy resulted in an increase in material efficiency by 42.2% and a decrease in process time by 17.8%, depending on the initial deformation imposed on the part geometry.
A failure of rolling element bearings is a frequent cause of machine breakdowns and results in a production loss due to the sudden failure. A regular condition health monitoring and an associated detection of bearing defects in the early stages can be used to predict such sudden failures. To monitor the bearing's condition, the generated vibration signature can be analyzed, since rotating machines have, in most instances, a unique vibration signature that relates to their health status. Presently, bearing analysis of many machines results in significant cost and complexity due to a large amount of vibration data that must be analyzed. A condition health monitoring system (CMS) was developed to automate and simplify the whole process from the vibration measurement to the analysis results. Additionally, the CMS is embedded into an Internet of Things (IoT) architecture. Thereby, a location-independent control of the CMS, the vibration data, and the analysis results is possible. The embedding of sensors can cause communication problems from the sensor to the cloud due to the low bandwidth of sensors and the amount of data that must be transmitted. To overcome this issue, an edge device that acts as a gateway between the vibration sensor and the cloud is the core of the CMS. It measures the vibration signal locally, analyzes it automatically, and publishes a feedback as to the bearing condition to the cloud.
30 January 2017 in Journal of Manufacturing Science and Engineering
High-speed machine tools typically provide high spindle speeds and feedrates to achieve an effective material removal rate (MRR). However, it is not possible to realize the full extent of their high-speed capabilities due to the sharp corners of toolpaths which are introduced by conventional machining strategies, such as contour- and direction-parallel toolpaths. To address this limitation, spiral toolpaths that can reduce the magnitude of sudden direction changes have been developed in previous researches. Nevertheless, for some pockets, the average radial cutting width is significantly decreased while the total length of the toolpath is significantly increased as compared to contour- and direction-parallel toolpath. In this situation, spiral toolpath may take more machining time. To overcome these drawbacks, an aggressive spiral toolpath generation method based on the medial axis (MA) transformation is proposed in machining pocket without islands inside, which refers to no additional material inside the counter. The salient feature of this work is that it integrates the advantages of both conventional contour-parallel machining strategy and the existing spiral toolpath machining strategy. The cutting width at each MA point is determined based on the diameter of the locally inscribed circle (LIC) of the MA point and the topological structure of MA. A distance-constrained contour determination algorithm is utilized to calculate the toolpath for each pass. Finally, a circular arc transition strategy is used to transform all the isolated passes into a spiral toolpath. Experiments are conducted to show the effectiveness of the proposed method.
Industry 4.0 (I4.0) is built upon the capabilities of Internet of Things technologies that facilitate the recollection and processing of data. Originally conceived to improve the performance of manufacturing facilities, the field of application for I4.0 has expanded to reach most industrial sectors. To make the best use of the capabilities of I4.0, machine architectures and design paradigms have had to evolve. This is particularly important as the development of certain advanced manufacturing technologies has been passed from large companies to their subsidiaries and suppliers from around the world. This work discusses how design methodologies, such as those based on functional analysis, can incorporate new functions to enhance the architecture of machines. In particular, the article discusses how connectivity facilitates the development of smart manufacturing capabilities through the incorporation of I4.0 principles and resources that in turn improve the computing capacity available to machine controls and edge devices. These concepts are applied to the development of an in-line metrology station for automotive components. The impact on the design of the machine, particularly on the conception of the control, is analyzed. The resulting machine architecture allows for measurement of critical features of all parts as they are processed at the manufacturing floor, a critical operation in smart factories. Finally, this article discusses how the I4.0 infrastructure can be used to collect and process data to obtain useful information about the process.