To improve the safety of electric vehicles, this paper analyzes the way of cooling lithium-ion batteries of electric vehicles and proposes an air-cooling scheme. First, a heat-generation model for the lithium-ion battery is prepared for numerical simulation and a finned air-cooling model is designed, which combines cold air with fins to lower the temperature of lithium-ion batteries. Through feasibility analysis, it is proved that the heat-generation model can reflect the actual heat generation of lithium-ion batteries. The cooling effect of the finned air-cooling model is also evaluated. The temperature can be 23.6 °C lower than the maximum compared with lithium-ion batteries without cooling. The cooling effect is desirable for diamond, triangle and rectangular lithium-ion battery packs, among which the rectangular battery pack achieves the most desirable effect. To conclude, to ensure the safe operation of lithium-ion batteries in electric vehicles, air cooling can be used to control their temperature, with the cooling effect in the rectangular lithium-ion battery pack being the most desirable.
Hybrid electric vehicles (HEVs) have certain advantages over internal combustion engines in terms of energy consumption and emission performance. However, the transmission system parameters are uncertain. The low matching between the engine and the power transmission system makes it a big problem to improve the efficiency of hybrid vehicles. Therefore, the multi-objective optimization design of hybrid vehicles is studied. The transmission system parameters of hybrid vehicles are analyzed from the objective function, decision variables, and constraints. The NSGA-II algorithm with elite strategy is introduced to realize the optimal selection of parameters and formulation of energy consumption optimization strategy. The results showed that the multi-objective optimization algorithm could adjust the position of the working point of the engine and improve the efficiency by more than 10%. There was an average difference of 2.15% after the improvement in the fuel consumption of four-gear vehicles. The fuel consumption per 100 km decreases by more than 3%. The maximum climbing gradient of the whole vehicle was 33.9%. The power factor of the direct gear of the maximum power factor increases by 15% after the improvement. The multi-objective energy consumption optimization design of hybrid vehicles proposed in the study can effectively improve the economic and dynamic performance of the whole vehicle and reduce fuel consumption. It provides a reference for the optimization of the hybrid vehicle transmission system.
Since the unique structure and transmission mode of new energy vehicles, the problem of parking prediction and control has always been the focus of its research. Therefore, to handle the predictive control problem of new energy vehicles in slope environments, the FMPC algorithm is applied to replace the core PID controller of new energy vehicles, and it is effectively validated using automotive simulation software on different slopes and vehicle masses. The experimental results indicate that new energy vehicles with FMPC algorithm can complete parking in about 6 s under different slopes and vehicle masses, while the PID algorithm may experience shaking and displacement. The FMPC algorithm proposed in the study achieves better results in electronic parking control of new energy vehicles on slopes, effectively improving the parking stability of new energy vehicles, which has practicality in practical slope parking of new energy vehicles.