The aim of this review article is to consolidate the important research works dedicated to polymers which are mainly used target material for heat transfer applications. The requirement of present day heat transfer equipment is compactness, lightweight, manufacturability, and lower cost. Materials like copper and aluminum though have better thermal conductivity but they are expensive and also heavy. Polymers are cheaper and easy to manufacture, recycle though they have sufficiently lower thermal conductivity compared to copper and aluminum. Polymer materials are thermally insulating material. It is too difficult to improve the amorphous nature of polymer material in order to achieve high thermal conductivity. One key path to increase the thermal conductivity of a polymer is to reinforce high thermal conductive fillers in the host matrix. In this review paper, an attempt is made to explore and summarize various key paths suggested by the researchers to develop high thermal conductive polymer composites.
Graphene is emerged as a highly sought after reinforcing filler for epoxy matrix in view of its superior electrical, mechanical and thermal properties. Dispersion of low concentration of graphene can significantly enhance the epoxy/graphene nanocomposites properties. Dispersion of graphene in epoxy matrix depends on processing protocols used, and interfacial interaction between epoxy matrix and graphene. Interfacial interaction between epoxy matrix and graphene can be achieved by covalent and non-covalent modification of graphene. This paper comprehensively review the influence of different processing protocols adopted for the processing of epoxy/graphene nanocomposites, and its effect on mechanical, thermal and electrical properties. In addition, covalent and non-covalent strategies adopted for modification of graphene, and its influence on mechanical, thermal and electrical properties of epoxy/graphene nanocomposites are extensively discussed. The future challenges associated with graphene reinforced epoxy nanocomposites processing have been discussed.