Using Fiber as the based material for photocatalyst particles is favorable for their recovery, thereby avoiding the photocatalyst particles cause secondary pollution to water environment. In this work, the AgBr and Ag3PO4 photocatalyst particles were loaded onto the surface of chitosan fiber (CF) via chelation and in situ anion-exchange method. The photocatalytic results illustrated that the AgBr/Ag3PO4/CF composites displayed the best photocatalytic performance when the mass ratio of Ag3PO4 and AgBr onto the CF was approximately 1:0.15, their degradation rate can reach 98.1% for the methyl orange (MO) solution, this value far exceeded those of pure CF, AgBr/CF composites, and Ag3PO4/CF composites. Besides, the AgBr/Ag3PO4/CF composites also shown excellent durability, after the fifth cycle, they still maintained a decolorization rate of 86.4% for the MO solution, while the Ag3PO4/CF composites maintained a decolorization rate of only 70.7%. Based on these results, we consider that the AgBr/Ag3PO4/CF composites have high practical interest in environmental remediation. Graphic Abstract
An ultraviolet (UV)-protective cotton fabric has been developed by combining tannic acid and copper ions (TA-Cu) on cotton fabrics. The structure and properties of TA-Cu and cotton fabrics finished with TA-Cu were characterized by Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The UV resistance and laundering durability of modified cotton fabrics were measured. The cotton fabric finished with tannic acid showed a maximum UV-protection factor value of 44.5, which was further improved by chelation with copper ions. The cotton fabric finished by the TA-Cu exhibits a UV-protection factor value of up to 172.1 and a UV transmittance of less than 1.5% when the concentration of tannic acid and copper ions was 0.1 mmol/L. The as-prepared cotton fabrics retained their UV resistance after laundering. This study proposes an eco-friendly anti-UV treatment for cotton fabrics and a novel application for tannic acid and copper ions to imbue fabrics with UV protection.
11 April 2016 in Journal of Dispersion Science and Technology
A series of solvent-free ionic silica (SiO2) nanofluids of 12.3–17.3 nm in diameter were synthesized by surface functionalizing nanoscale SiO2 with a charged corona and ionically tethering with oligomeric chains as canopy. The structure and properties of the nanofluids were systematically characterized by Fourier transform infrared (FTIR), differential scanning calorimeter (DSC), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and rheology tests. The resultant nanofluids with low-molecular-weight oligomeric as canopy are homogeneous, stable yellow-like fluids with no evidence of phase separation at room temperature, while other nanofluids containing high-molecular-weight as canopy behave like a soft glassy, and they exhibit fluidity with still high modulus and viscosity above 60°C. For deeper understanding of the nature of SiO2 nanofluids, the rheological behavior, thermal stability, as well as morphology of SiO2 nanofluids were investigated in details. The flow properties of nanofluids could be easily regulated from soft glassy to free flowing liquids by varying the molecule weight of canopy. Most importantly, the thermal stability, rheological behavior, as well as morphology can be also regulated through varying molecule weight and thickness of canopy, which will guide our future work on synthesis of nanofluids with controllable physical properties. GRAPHICAL ABSTRACT
15 November 2022 in Journal of Vinyl and Additive Technology