When exposed to sunlight, crystalline silicon solar cells (CSSC) will not only generate electric energy but are also heated by solar radiation. Such a self-heating effect makes the working temperature of CSSC 20–40 °C higher than that of the ambient temperature, which degrades their efficiency and reliability. The elevated operating temperatures of CSSC are mainly derived from absorbing photons that cannot be converted to electrons. Therefore, it is important to prevent CSSC from absorbing useless solar light to have a better cooling effect. In this paper, photonic structures based spectrum-selective mirror is designed to cool the operating temperatures of CSSC passively. The mirror could make CSSC absorb about 93% of the sunlight in the wavelength range of 0.3 to 1.1 µm and only absorb about 4% of the sunlight in the wavelength range of 1.1 to 2.5 µm. Meanwhile, the design has good compatibility with the radiative cooling strategy. By applying selective-absorptive and radiative cooling strategies, the operating temperature of CSSC could be decreased about 23.2 K and 68.1 K under different meteorological conditions. Moreover, unlike the single radiative cooling strategy, the spectrum-selective mirror also has effective cooling effects in high wind speed meteorological conditions.
This study constructed a two-dimensional alkaline water electrolyzer model based on the two-phase flow Euler–Euler model. In the model, the micro-nano surface electrodes with different structure types and graphic parameters (distance, height, and width) were used and compared with the vertical flat electrode to evaluate their influence on electrolysis performance. The simulation results show that the performance of the micro-nano surface electrode is much better than that of the vertical flat electrode. The total length of micro-nano structural units relates to the contact area between the electrode and the electrolyte and affects the cell voltage, overpotential, and void fraction. When rectangular structural units with a distance, height, and width of 0.5 µm, 0.5 µm, and 1 µm are used, the total length of the corresponding micro-nano surface electrode is three times that of the vertical flat electrode, and the cathode overpotential decreases by 65.31% and the void fraction increases by 54.53% when it replaces the vertical flat electrode.
The sunlight incident on outdoor solar cells comes from all directions, and the surface reflectance of covered glass of solar cells increases with the sunlight incident angle. The above-mentioned factors together lead to the absorption loss and low utilization of incident photons. An antireflection (AR) layer with micro-/nano-structures provides an omnidirectional-antireflection characteristic because of a gradual refractive index, which is a practical approach for solving the existing problems and further improving the photoelectric conversion efficiency (PCE) of solar cells. Micrometer-sized inverted pyramid structured polydimethylsiloxane AR layers were fabricated on surfaces of dye-sensitized solar cells (DSSCs) by a cost-effective method—nanoimprint lithography. Results show that the AR layers significantly reduce the reflectance and improve the PCE of DSSCs at oblique incidence. Reflectance decreases by 5.6%–10.58%, and the PCE relatively increases by 5.83%–15.25% in the light incidence angle range of 20°–60°. Meanwhile, the AR layer exhibits a hydrophobic surface with a water contact angle of ∼98.1°, which increases by 40.2° compared with the DSSC without the AR layer, and it further provides self-cleaning potential. Moreover, nanoimprint lithography could be integrated with industrial roll-to-roll technology, which reduces the fabrication cost and possesses industrial application potential.
30 August 2025 in International Journal of Hydrogen Energy