In this article, we focus on a joint scheduling problem that considers the corrective maintenance (CM) due to unexpected breakdowns and the scheduled preventive maintenance (PM) in a generic M-machine flow shop. The objective is to find the optimal job sequence and PM schedule such that the total of the tardiness cost, PM cost, and CM cost is minimized. Currently, most existing studies on the PM schedules are based on a fixed PM interval, which is rigid and may lead to poor performance, as the fixed strategy fails to effectively balance the trade-offs between the production scheduling and maintenance. To address this critical research issue, our novel idea is to dynamically update the PM interval based on the real-time machine age, such that the maintenance activity coordinates with the job scheduling to the maximum extent, which results in an overall cost saving. Specifically, a correction factor is introduced to dynamically update the PM interval and to help evaluate whether it is worthwhile to process the job first at the risk of the CM before performing the PM action. To demonstrate the effectiveness of the adaptive strategy, simulations and a case study on mining operations are conducted to show that the adaptive strategy outperforms the existing methods with a less total cost.

With the rapid advancement of in-process measurements and sensor technology driven by zero-defect manufacturing applications, high-dimensional heterogeneous processes that continuously collect distinct physical characteristics frequently appear in modern industries. Such large-volume high-dimensional data place a heavy demand on data collection, transmission, and analysis in practice. Thus, practitioners often need to decide which informative data streams to observe given the resource constraints at each data acquisition time, which poses significant challenges for multivariate statistical process control and quality improvement. In this article, we propose a generic online nonparametric monitoring and sampling scheme to quickly detect mean shifts occurring in heterogeneous processes when only partial observations are available at each acquisition time. Our innovative idea is to seamlessly integrate the Thompson sampling (TS) algorithm with a quantile-based nonparametric cumulative sum (CUSUM) procedure to construct local statistics of all data streams based on the partially observed data. Furthermore, we develop a global monitoring scheme of using the sum of top- ${r}$ local statistics, which can quickly detect a wide range of possible mean shifts. Tailored to monitoring the heterogeneous data streams, the proposed method balances between exploration that searches unobserved data streams for possible mean shifts and exploitation that focuses on highly suspicious data streams for quick shift detection. Both simulations and a case study are comprehensively conducted to evaluate the performance and demonstrate the superiority of the proposed method. Note to Practitioners —This paper is motivated by the critical challenge of online process monitoring by considering the cost-effectiveness and resource constraints in practice (e.g., limited number of sensors, limited transmission bandwidth or energy constraint, and limited processing time). Unlike the existing methodologies which rely on the restrictive assumptions (e.g., normally distributed, exchangeable data streams) or require historical full observations of all data streams to be available offline for training, this paper proposes a novel monitoring and sampling strategy that allows the practitioners to cost-effectively monitor high-dimensional heterogeneous data streams that contain distinct physical characteristics and follow different distributions. To implement the proposed methodology, it is necessary: (i) to identify sample quantiles for each data stream based on historical in-control data offline; (ii) to determine which data streams to observe at each acquisition time based on the resource constraints; and (iii) to automatically screen out the suspicious data streams to form the global monitoring statistic. Experimental results through simulations and a case study have shown that the proposed method has much better performance than the existing methods in reducing detection delay and effectively dealing with heterogeneous data streams.

Operating room (OR) planning is critical in healthcare systems to reduce cost and improve the efficiency of OR scheduling. The OR planning problem is complicated, involving many conflicting factors, such as overtime and idle time, both of which affect OR utilization and consequently affect cost to a hospital. Allocating different types of surgeries into OR blocks affects the setup cost, whereas priorities of surgeries affect OR block scheduling. Surgery durations affect both OR utilization and OR block scheduling. Traditionally, one important method for OR block scheduling is the bin packing model, and the longest processing time (LPT) rule is the most commonly used method to generate the initial sequence for bin packing. In this study. We propose a multistep approach and a priority-type-duration (PTD) rule to generate the initial sequence for bin packing. The results of our case studies show that our PTD rule outperforms the LPT rule based on the cost to OR scheduling