Yujun Shi

Prof. Yujun Shi

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2015 in Accounts of Chemical Research
Verified
Journal Article
Open access
YSYujun Shi
Yujun Shi
Hot wire chemical vapor deposition (HWCVD), also referred to as catalytic CVD (Cat-CVD), has been used to produce Si-containing thin films, nanomaterials, and functional polymer coatings that have found wide applications in microelectronic and photovoltaic devices, in automobiles, and in biotechnology. The success of HWCVD is largely due to its various advantages, including high deposition rate, low substrate temperatures, lack of plasma-induced damage, and large-area uniformity. Film growth in HWCVD is induced by reactive species generated from primary decomposition on the metal wire or from secondary reactions in the gas phase. In order to achieve a rational and efficient optimization of the process, it is essential to identify the reactive species and to understand the chemical kinetics that govern the production of these precursor species for film growth. In this Account, we report recent progress in unraveling the complex gas-phase reaction chemistry in the HWCVD growth of silicon carbide thin films using organosilicon compounds as single-source precursors. We have demonstrated that laser ionization mass spectrometry is a powerful diagnostic tool for studying the gas-phase reaction chemistry when combined with the methods of isotope labeling and chemical trapping. The four methyl-substituted silane molecules, belonging to open-chain alkylsilanes, dissociatively adsorb on W and Ta filaments to produce methyl radical and H2 molecule. Under the typical deposition pressures, with increasing number of methyl substitution, the dominant chemistry occurring in the gas phase switches from silylene/silene reactions to free-radical short chain reactions. This change in dominant reaction intermediates from silylene/silene to methyl radicals explains the observation from thin film deposition that silicon carbide films become more C-rich with a decreasing number of Si–H bonds in the four precursor molecules. In the case of cyclic monosilacyclobutanes, we have shown that ring-opening reactions play a vital role in characterizing the reaction chemistry. On the other hand, exocyclic Si–H(CH3) bond cleavages are more important in the less-puckered disilacyclobutane molecules. Metal filaments are essential in HWCVD since they serve as catalysts to decompose precursor gases to reactive species, which initiate gas-phase reaction chemistry and thin film growth. We discuss the structural changes in metal filaments when exposed to various precursor gases. Depending on the nature of the radical intermediates formed from the hot-wire decomposition and subsequent gas-phase reactions, metal silicides and carbides can be formed. Overall, study of the gas-phase reaction chemistry in HWCVD provides important knowledge of the chemical species produced prior to their deposition on a substrate surface. This helps in identifying the major contributor to alloy formation on the filament itself and the film growth, and consequently, in determining the properties of the deposited films. An integrated knowledge of the gas-phase reaction chemistry, filament alloy formation, and thin film deposition is required for an efficient deposition of high-quality thin films and nanomaterials.

21 October 2019 in Advanced Functional Materials
Verified
Journal Article
Closed access
PDF file
MRMohammad Rahmati
Mohammad Rahmati
SDSergey Dayneko
Sergey Dayneko
Majid PahlevaniMajid Pahlevani
Majid Pahlevani
YSYujun Shi
Yujun Shi

6 February 2007 in Journal of Mass Spectrometry
Verified
Journal Article
Closed access
PDF file
YSYujun Shi
Yujun Shi
BLB. Lo
B. Lo
LTL. Tong
L. Tong
XLX. Li
X. Li
BEB. D. Eustergerling
B. D. Eustergerling
TST. S. Sorensen
T. S. Sorensen

17 March 2022 in Nanotechnology
Verified
Journal Article
Open access
PDF file
SBStephanie Nicole Bonvicini
Stephanie Nicole Bonvicini
BFBo Fu
Bo Fu
AFAlison Joy Fulton
Alison Joy Fulton
Zhitai JiaZhitai Jia
Zhitai Jia
YSYujun Shi
Yujun Shi
Formation of Au, Pt, and bimetallic Au–Pt nanostructures by thermal dewetting of single-layer Au, Pt and bilayer Au–Pt thin films on Si substrates was systematically studied. The solid-state dewetting of both single-layer and bilayer metallic films was shown to go through heterogeneous void initiation followed by void growth via capillary agglomeration. For the single-layer of Au and Pt films, the void growth started at a temperature right above the Hüttig temperature, at which the atoms at the surface or at defects become mobile. Uniformly distributed Au (7 ± 1 nm to 33 ± 8 nm) and Pt (7 ± 1 nm) NPs with monodispersed size distributions were produced from complete dewetting achieved for thinner 1.7−5.5 nm thick Au and 1.4 nm thick Pt films, respectively. The NP size is strongly dependent on the initial thin film thickness, but less so on temperature and time. Thermal dewetting of Au–Pt bilayer films resulted in partial dewetting only, forming isolated nano-islands or large particles, regardless of sputtering order and total thin film thickness. The increased resistance to thermal dewetting shown in the Au–Pt bilayer films as compared to the individual Au or Pt layer is a reflection of the stabilizing effect that occurs upon adding Pt to Au in the bimetallic system. Energy dispersive x-ray spectroscopic analysis showed that the two metals in the bilayer films broke up together instead of dewetting individually. According to the x-ray diffraction analysis, the produced Au–Pt nanostructures are phase-segregated, consisting of an Au-rich phase and a Pt-rich phase.

31 January 2020 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
AFAlison Joy Fulton
Alison Joy Fulton
VKVinayaraj Ozhukil Kollath
Vinayaraj Ozhukil Kollath
KKKunal Karan
Kunal Karan
YSYujun Shi
Yujun Shi
This work reports the influence of the substrate in the pulsed laser-induced dewetting (PLiD) of Au thin films for the fabrication of nanoparticle (NP) arrays. Two substrates were studied, i.e., polished silicon and porous silicon (PS), the latter being fabricated via electrochemical anodization in HF-containing electrolytes. The effect of both PLiD and substrate preparation parameters was explored systematically. On polished silicon substrates, it has been shown that uniform, randomly arranged NPs between 15 ± 7 nm and 89 ± 19 nm in diameter are produced, depending on initial thin film thickness. On PS however, there are topographical features that lead to the formation of ordered NPs with their diameters being controllable through laser irradiation time. The presence of surface pores and the appearance of surface ripples under low HF concentrations (<9.4 wt%) during electrochemical anodization results in this unique dewetting behaviour. Through AFM analysis, it has been determined that the ordered NPs sit within the valleys of the ripples, and form due to the atomic mobility enabled using the PLiD approach. This work has demonstrated that the utilization of topographically complex PS substrates results in size controllable and ordered NPs, while the use of polished Si does not enable such control over array fabrication.

17 March 2008 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
YSYujun Shi
Yujun Shi
XLXinmao Li
Xinmao Li
LTLing Tong
Ling Tong
RTRim Toukabri
Rim Toukabri
BEBrett Eustergerling
Brett Eustergerling
To study the effect of an Si–Si bond on gas-phase reaction chemistry in the hot-wire chemical vapor deposition (HWCVD) process with a single source alkylsilane molecule, soft ionization with a vacuum ultraviolet wavelength of 118 nm was used with time-of-flight mass spectrometry to examine the products from the primary decomposition of hexamethyldisilane (HMDS) on a heated tungsten (W) filament and from secondary gas-phase reactions in a HWCVD reactor. It is found that both Si–Si and Si–C bonds break when HMDS decomposes on the W filament. The dominance of the breakage of Si–Si over Si–C bond has been demonstrated. In the reactor, the abstraction of methyl and H atom, respectively, from the abundant HMDS molecules by the dominant primary trimethylsilyl radicals produces tetramethylsilane (TMS) and trimethylsilane (TriMS). Along with TMS and TriMS, various other alkyl-substituted silanes (m/z = 160, 204, 262) and silyl-substituted alkanes (m/z = 218, 276, 290) are also formed from radical combination reactions. With HMDS, an increasing number of Si–Si bonds are found in the gas-phase reaction products aside from the Si–C bond which has been shown to be the major bond connection in the products when TMS is used in the same reactor. Three methyl-substituted 1,3-disilacyclobutane species (m/z = 116, 130, 144) are present in the reactor with HMDS, suggesting a more active involvement from the reactive silene intermediates.