An active landslide in Doren, Austria, has been studied by multitemporal airborne and terrestrial laser scanning from 2003 to 2012. To evaluate the changes, we have determined the 3D motion using the range flow algorithm, an established method in computer vision, but not yet used for studying landslides. The generated digital terrain models are the input for motion estimation; the range flow algorithm has been combined with the coarse-to-fine resolution concept and robust adjustment to be able to determine the various motions over the landslide. The algorithm yields fully automatic dense 3D motion vectors for the whole time series of the available data. We present reliability measures for determining the accuracy of the estimated motion vectors, based on the standard deviation of components. The differential motion pattern is mapped by the algorithm: parts of the landslide show displacements up to 10 m, whereas some parts do not change for several years. The results have also been compared to pointwise reference data acquired by independent geodetic measurements; reference data are in good agreement in most of the cases with the results of range flow algorithm; only some special points (e.g., reflectors fixed on trees) show considerably differing motions.
28 August 2013 in IEEE Geoscience and Remote Sensing Letters
Full-waveform lidar has gained increasing attention in 3-D remote sensing and related disciplines during the last decade due to its capability of delivering both geometric and radiometric information in the same spatial resolution. Radiometric information may either be related to the echo, e.g., echo amplitude and width, or to the target itself, e.g., the backscatter cross section (BCS). Echo parameters, often obtained by Gaussian decomposition, as well as target properties, which are (geo)physical properties and therefore independent of data acquisition mission parameters, are considered as additional features of the point cloud generated by laser scanning. The BCS commonly is derived by performing a deconvolution which results in its temporal derivative, the differential backscatter cross-section (dBCS), and subsequent integration. The temporal shape of the dBCS has gained little attention in the literature so far. In this letter, we discuss the derivation of additional target parameters, namely the statistical moments of the respective target dBCS. Besides discussing the applicability of established deconvolution approaches for the extraction of statistical moments in the dBCS, special emphasis is laid on their derivation in B-spline-based deconvolution. Uniform B-splines allow for linear deconvolution and subsequent radiometric calibration. We illustrate the potential of the proposed method by a sample data set stemming from an airborne lidar campaign in complex mountainous terrain.