In order to evaluate the feasibility of using hard-grade asphalt concrete in China’s highway construction, based on the accelerated loading test of the full-scale track of the Research Institute of Highway Ministry of Transport (RIOHTrack), the long-term service performance of hard-grade asphalt concrete base pavement was studied, and its actual service effect was evaluated. The study found that hard-grade asphalt concrete has higher strength, modulus and high-temperature stability. Although the low-temperature performance is generally not as good as that of asphalt, with a penetration grade (PG) of 60/80, it has equivalent or better cracking resistance in the area where the RIOHTrack is located. During the five-year observation period, the rutting deformation of the pavement structure showed an annual fluctuation increase. In comparison, the rutting resistance of a hard-grade asphalt concrete base structure can be increased by approximately 16%, and the deflection value is smaller, so the long-term performance of the anti-rutting effect and structural bearing capacity are better. The study shows that hard-grade asphalt concrete base pavement is suitable for highway construction in parts of China, where the climate is similar to that of the RIOHTrack location, or the temperature is higher or the latitude is lower.

In order to improve the accuracy and reliability of an existing rutting performance prediction model, based on the long-term observation data of the RIOHTrack’s full-scale pavement structure, the rutting performance prediction model in China’s Specifications for Design of Highway Asphalt Pavement was evaluated, and the model correction method was proposed, which improves the model’s reliability and makes it more suitable for rutting estimation in the region. The research found that the rutting model in China’s Specifications for Design of Highway Asphalt Pavement has significant structural dependence. The model with the highest prediction accuracy and the smallest error is the semi-rigid base asphalt pavement structure with an asphalt concrete layer thickness of 12 cm; the prediction accuracy of other structures is not high. In order to improve the accuracy and reliability of the rutting prediction model, a new model is established by introducing local correction coefficients into the existing model. After local correction, the accuracy of the rutting prediction models for all structures has been greatly improved, and the determination coefficient R² is greater than 0.87. Since the basic data has already reflected the characteristics of different pavement structures and materials, as well as the impact of local climate environment and traffic load conditions, the new model is more suitable for rutting prediction of various pavement structures in the region where the RIOHTrack is located.

Asphalt mixture is a typical viscoelastic material, and its road performance will change with the action of environment and load during actual service. This study conducted experimental research on the surface course asphalt mixture of three categories and six typical structures of RIOHTrack based on the Dynamic Mechanical Analysis method. Moreover, this study explored the performance evolution law of asphalt mixture under the coupling action of load and environment in the process of loading from 0 million to 54 million standard axle times. Results demonstrated that the phase transition characteristic temperature of the surface course materials of the three types of typical structures showed a trend of first increasing and then decreasing with the accumulation of load and environmental effects, indicating the presence of two stages of the dual coupling effect of environmental aging and load rolling on the asphalt mixture during service. In addition, the results suggested that the phase transition characteristic temperature, modulus, and phase angle of the surface layer materials have obvious material differences and structure dependencies.