Canopy clumping index (CI) is a key structural parameter related to vegetation phenology and the absorption of radiation, and it is usually retrieved from remote sensing data based on an empirical relationship with the Normalized Difference between Hotspot and Darkspot (NDHD) index. A rapid production software was developed to implement the CI algorithm based on the Google Earth Engine (GEE) to update current CI products and promote the application of CI in different fields. Daily, monthly, and yearly global CI products are continuously generated and updated in real-time by the software. Users can directly download the product or work with CI without paying attention to data generation. For the application case study, a change detection algorithm, LandTrendr, was implemented on the GEE to examine the global CI trend from 2000 to 2020. The results indicate that the area of increase trend (28.7%, ΔCI > 0.02) is greater than that of the decrease trend (17.1%, ΔCI < −0.02). Our work contributes toward the retrieval, application, and validation of CI.
15 May 2025 in Agricultural and Forest Meteorology
Key message: Evaluated tower, mast, crane, and UAV methods for forest vertical gap fraction, LAI, and CI measurements in different seasons. UAV is promising for forest vertical structural profiling. The vertical distribution of canopy structural parameters, such as canopy gap fraction, leaf area index (LAI) and clumping index (CI), is important for understanding the forest structural and functional properties. However, vertically distributed canopy structural data are rare, and current methods are either inefficient or costly for obtaining sufficient amounts of such data. This study conducted a series of field campaigns to obtain forest vertical structural measurements at two temperate forest sites in northern China from 2020 to 2023. Four different measurement systems were compared: (1) flux towers with accessible platforms at different heights, (2) a portable and extensible sampling mast with a digital hemispherical photography (DHP) camera attached on top, (3) a tower crane with a DHP camera fixed on the crane hook, and (4) an uncrewed aerial vehicle (UAV) with a DHP camera attached on top. The measured effective plant area index (PAIeff) shows clearly seasonal variations at different heights. The CI remains relatively consistent at different heights, and the leaf-off value is approximately 0.1−0.2 higher than the leaf-on one. The flux tower method can be used for vertical profile measurement at a fixed location, whereas the portable mast is suitable for lower-level (< 15 m) measurement. Crane measurement requires an established facility and is useful for local measurement around the crane. UAV with an attached DHP provides a promising method for monitoring vertical structural parameters. The vertical structural profiles obtained in this study can be used in various modeling and validation studies.
9 June 2026 in IEEE Transactions on Geoscience and Remote Sensing
Canopy cover (CC) is the proportion of ground area covered by vertical projection of canopy elements and is a key variable in ecological and hydrological models. A CC product has been derived from Global Ecosystem Dynamics Investigation (GEDI). However, recent validation studies show that this product contains biases, mainly because of uncertainties in ground return determination. This study developed a novel model to predict ground elevation based on a Transformer Encoder using 49 features derived from the raw GEDI waveform. Reference elevation was obtained from airborne laser scanning (ALS) point clouds and used to train the model. Subsequently, CC was estimated by fitting ground return based on the predicted elevations. A leave-one-out method was used to cross-validate the estimated elevation and CC across 23 National Ecological Observatory Network (NEON) based on reference ALS data. The enhanced elevation and CC product were further validated at three independent sites in Brazil and Australia. Results show that ground elevation predicted from the model improved over the original GEDI product, with RMSE reduced from 4.86 m to 3.69 m. Cross-validation and independent testing show that RMSE values were reduced by 14.0% and 15.4%, respectively, compared to the original GEDI products. The estimated CC (r² = 0.65, RMSE = 0.20) exhibits higher accuracy than the GEDI product (r² = 0.59, RMSE = 0.23) compared to the reference ALS data. Both elevation and CC were significantly improved in broadleaf forests (elevation: ΔRMSE = −2.07 m; CC: Δr² = 0.21, ΔRMSE = −0.07) and mixed forests (elevation: ΔRMSE = −1.70 m; CC: Δr² = 0.27, ΔRMSE = −0.07), especially for areas with high vegetation cover (CC > 0.8). In general, the proposed transformer encoder model can effectively improve the GEDI ground elevation and CC estimation and can be used for future product generation.