Advancements in drilling technology are pivotal to optimizing the production and sustainability of oil and gas wells. One of the emerging innovations is the application of a specialized fluid known as “Fuzzy-ball” fluid. This paper comprehensively reviews the historical evolution and advancements in the utilization of fuzzy-ball fluid in drilling and well-repair processes. Fuzzy-ball fluid has been discovered to bolster a formation’s pressure-bearing capabilities and systematically augment resistance against oil, gas, and water flow. These attributes have been instrumental in the phased integration of fuzzy-ball fluid into procedures aiming to enhance production in oil and gas wells. This paper bridges the knowledge gap in the industry regarding the application of fuzzy-ball fluid, thereby circumventing the challenges of inadequate understanding and suboptimal designs. However, the study acknowledges the potential limitation of information loss despite the extensive data collection from diverse sources, such as articles, patents, and reports. As a future direction, this paper emphasizes the need for a more encompassing and critical evaluation of fuzzy-ball fluid’s performance and applications. This will enable a more informed decision-making process, fostering the expanded use and understanding of this fluid’s mechanism within the industry.

Flexible electrothermal heaters have attracted abundant attention in recent years due to their wide applications, but their preparation with high efficiency remains a challenge. Here in this work, a highly stable and bending-tolerant flexible heater was fabricated with graphite nanosheets and cellulose fibers through a scalable papermaking procedure. Its electrothermal property can be enhanced by a hot-pressing treatment and introduction of cationic polyacrylamide (CPAM) during the papermaking protocol. The flexible heater may quickly reach its maximum temperature of 239.8 °C in around 1 min at a voltage of 9 V. The power density was up to 375.3 °C cm² w⁻¹. It appeared to have a high tolerance for bending deformation with various curvatures, and the temperature remained stable even under 100 bending with frequency of around 0.17 Hz. Over 100 alternatively heating and cooling cycles, it worked stably as well. It was proved to be used as wearable heating equipment, soft heaters, and aircraft deicing devices, suggesting its great prospect in the field of heat management.

This study addresses the challenges of low-pressure oil well workover operations, namely, severe loss of water-based workover fluid, significant reservoir damage from conventional temporary plugging agents, and slow production recovery, by focusing on the yet-mechanistically unclear “fuzzy-ball workover fluid.” Laboratory experiments combined with field data were used to evaluate its plugging performance and reservoir-protective mechanisms. In sand-filled tubes (diameter 25 mm, length 20–100 cm) sealed with the fuzzy-ball fluid, the formation’s bearing capacity increased by 3.25–18.59 MPa, showing a positive correlation with the plugging radius. Compatibility tests demonstrated that mixtures of crude oil and workover fluid (1:1) or crude oil, workover fluid, and water (1:1:1) held at 60 °C for 80 h exhibited only minor apparent viscosity reductions of 4 mPa·s and 2 mPa·s, respectively, indicating good stability. After successful plugging, a 1% ammonium persulfate solution was injected for 2 h to break the gel; permeability recovery rates reached 112–127%, confirming low reservoir damage and effective gel-break de-blocking. Field data from five wells (formation pressure coefficients 0.49–0.64) showed per-well fluid consumption of 33–83 m³ and post-workover liquid production index recoveries of 5.90–53.30%. Multivariate regression established mathematical relationships among bearing capacity, production index recovery, and fourteen geological engineering parameters, identifying the plugging radius as a key factor. Larger radii enhance both temporary plugging strength and production recovery without harming the reservoir, and they promote production by expanding the cleaning zone. In summary, the fuzzy-ball workover fluid achieves an integrated “high-efficiency plugging–low-damage gel-break–synergistic cleaning” mechanism, resolving the trade-off between temporary-plugging strength and production recovery in low-pressure wells and offering an innovative, environmentally friendly solution for the sustainable and efficient exploitation of oil–gas resources.

In recent years, there has been quite a dispute over the water shutoff effect of fuzzy ball fluids in fractured tight sandstone gas reservoirs. The core issue of this dispute is to try and make fuzzy ball fluid stabilize gas during the water shutoff process for sustainable development. In order to solve this dispute, the Linxing He-2 reservoir matrix core and a core with artificial fractures were used to simulate interlayer water, artificial fractures, and water output channels from the side and bottom. Simulated formation water and nitrogen were used as the two-phase flow phase. The breakthrough pressure of the air and water phases was tested after plugging with fuzzy ball fluid in order to simulate and analyze the water shutoff effect of the fuzzy ball fluid and its ability to achieve air establishment and water control. The results of this study show that for the core matrix, the breakthrough pressure gradient for water and gas varied from 0.200 MPa/cm to 0.210 MPa/cm and 0.015 MPa/cm to 0.025 MPa/cm, and for artificial fractured cores, the breakthrough pressure gradient of water and gas varied from 0.035 MPa/cm to 0.040 MPa/cm and 0.015 MPa/cm to 0.020 MPa/cm. These results prove that fuzzy ball fluid can block small-scale water output channels, such as matrix pores, through the polymer film-forming structure, and plug the artistic cracks and large-scale water output channels of the water flowing into the sides and bottom through the accumulation of a large number of fuzzy balls, which greatly improves the flow resistance of water. The amount of fuzzy ball fluid should be carefully adjusted with consideration of the water output and formation conditions. For large-scale water output channels and side and bottom water shutoff operations, it is recommended that the amount of fuzzy balls be increased along with the number of fuzzy balls in the system in order to increase the breakthrough pressure of water and achieve the stable control of air and water. It is believed that the fuzzy balls would quickly change their shapes to match the sizes of fracture channels to enter into fractured reservoirs and that an active hydrophobic membrane would form on the surface of fractured rocks, with macromolecules and surfactants being dispersed in the fluid system. In addition, the interface between the fuzzy balls is also hydrophobic, which would slow down the flow of water and provide a continuous gas percolating channel after aggregating and entering into the fractures. This increases the persistence of water intruding into the formation and does not affect the percolation of the gas of fractured tight sandstone gas reservoirs. This research is of great significance for the EOR of tight sand gas reservoirs and the sustainable development of oil and gas resources in China.