Zhongxiang Zhao

Dr. Zhongxiang Zhao

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2022 in Minerals
Verified
Journal Article
Open access
PDF file
WGWei Guo
Wei Guo
CDChunmei Dong
Chunmei Dong
CLChengyan Lin
Chengyan Lin
Tao ZhangTao Zhang
Tao Zhang
ZZZhongxiang Zhao
Zhongxiang Zhao
JLJia Li
Jia Li
Ground Penetrating Radar (GPR) is a geophysical method that uses antennas to transmit and receive high-frequency electromagnetic waves to detect the properties and distribution of materials in media. In this paper, geological observation, UAV detection and GPR technology are combined to study the recent sediments of the Yungang braided river study area in Datong. The application of the GPR technique to the description of fluvial facies and reservoir architecture and the development of geological models are discussed. The process of GPR detection technology and application includes three parts: GPR data acquisition, data processing and integrated interpretation of GPR data. The geological surface at different depths and scales can be identified by using different combinations of frequencies and antenna configurations during acquisition. Based on outcrop observation and lithofacies analysis, the Yandong Member of the Middle Jurassic Yungang Formation in the Datong Basin has been identified as a typical sandy braided river sedimentary system. The sandy braided river sandbody changes rapidly laterally, and the spatial distribution and internal structure of the reservoir are very complex, which has a very important impact on the migration and distribution of oil and gas as a reservoir. It is very important to make clear the characteristics of each architectural unit of the fluvial sand body and quantitatively characterize them. The architectural elements of the braided river sedimentary reservoir in the Datong-Yungang area can be divided into three types: Channel unit, bar unit and overbank assemblages. The geological radar response characteristics of different types of sedimentary units are summarized and their interfaces are identified. The channel sediments form a lens-shaped wave reflection with a flat at the top and convex-down at the bottom in the radar profile, and the angles of the radar reflection directional axes are different on both sides of the sedimentary interface. In the radar profile, the deposit of the unit bar is an upward convex reflection structure. The overbank siltation shows a weak amplitude parallel reflection structure. The flood plain sediments are distributed continuously and stably in the radar profile, showing weak reflection characteristics. Different sedimentary units are identified by GPR data and combined with Unmanned Aerial Vehicle (UAV) detection data, and the establishment of the field outcrop geological model is completed. The development pattern of the diara is clarified, and the swing and migration of the channel in different stages are identified.

5 July 2021 in Lithosphere
Verified
Journal Article
Open access
PDF file
ZZZhongxiang Zhao
Zhongxiang Zhao
YHYoubin He
Youbin He
XHXin Huang
Xin Huang
Natural fractures are not only the key to affect the natural productivity of tight sandstone reservoirs but also one of the important factors to control the fracturing effect. If the local strata are affected by multistage tectonic movement and diagenesis, it will lead to the complexity of fracture types and characteristics, which makes it difficult to accurately identify natural fractures, thus, seriously affect the development of fractured reservoirs and the fracturing effect. In this paper, the macroscopic fractures were studied by combining core, conventional logging, imaging logging, petrophysical logging, logging, drilling, and gas test data. The microscopic fractures were analyzed by casting thin sections and scanning electron microscopy and cathodoluminescence. The effect of fractures on hydrocarbon migration was analyzed by fluid inclusions in fractures. The core can be used to visually study the opening fracture, but when the color of the filling inside the fracture is similar to the surrounding, the filling fracture is not easy to be found. Imaging logging has high identification accuracy for filling fractures, but it can hardly be used as a means of identifying high-angle opening fractures. The opening fracture zone in the noncoring section can be studied by conventional logging, mud logging, drilling, and rock mechanical parameter. The macroscopic structural fractures are obviously directional, which is controlled by the tectonic stress field. The occurrence and density of macroscopic structural fractures are controlled by buried depth, lithology, rock thickness, sedimentary facies, distance from the fault, and structural location. The opening fractures are all of high angle, indicating that the inclination angle is an important factor affecting the filling degree of fractures. The direction of intragranular fractures is chaotic, which is affected by the mechanical weak surface of the mineral particles, particle morphology, and particle contact relationship and stress. Effective fractures provide channels for the migration of oil and gas and acidic fluids in the historical period, which promote the occurrence of hydrocarbon accumulation and dissolution.

21 September 2023 in SPE Journal
Verified
Journal Article
Closed access
PDF file
JLJingyao Lou
Jingyao Lou
XXXiaohong Xu
Xiaohong Xu
ZZZhongxiang Zhao
Zhongxiang Zhao
YLYang Li
Yang Li
YHYoubin He
Youbin He
Summary: Low-resistance reservoirs have been of great interest as a key topic in the study of low-permeability reservoirs. Accurate identification of fluid properties is a challenging problem in the effective exploration of such reservoirs. Logging data, as a common identification tool, can provide rich and highly accurate geological information. Here, we combine extreme gradient boosting (XGBoost) and MAHAKIL’s oversampling method for fluid property identification using logging data from low-permeability sandstone reservoirs. The MAHAKIL method is used to solve the class imbalance problem due to unbalanced training samples, and the data are fed into XGBoost to build a geological model with complex abstract feature weights related to fluid properties through multiple decision trees. We first demonstrate that MAHAKIL can improve the XGBoost model accuracy using four evaluation criteria, namely, the F1-score, recall, precision, and accuracy, among which the F1-score is most applicable to the classification problem of reservoir fluid prediction. Then, the receiver operating characteristic (ROC) and area under the curve (AUC) values are used to demonstrate that MAHAKIL improves the XGBoost model performance. Finally, the results and performance of this method and the traditional XGBoost model with unbalanced real data are compared. The results show that the proposed method is superior for fluid property identification in low-permeability sandstone reservoirs with imbalanced learning samples.

31 August 2022 in Frontiers in Earth Science
Verified
Journal Article
Open access
ZZZhongxiang Zhao
Zhongxiang Zhao
SWS. B. Wu
S. B. Wu
MHM. W. He
M. W. He
YFY. J. Fan
Y. J. Fan
Shale pore throat is one of the key factors affecting shale oil and gas exploitation. In order to study the effect of saline on shale pore throat in the continental lacustrine basin, the paleo-salinity of the lacustrine basin was analyzed using the Couth and Sr/Ba methods, and the pore throat characteristics of shale were observed by thin section and scanning electron microscope. The saline stage is divided into five stages: freshwater (0.5‰–1‰), brackish water (1‰–5‰), brackish water (5‰–15‰), brackish water (15‰–30‰), and high saltwater (>30‰). Shale is mainly reserved in micropores (organic, intercrystalline, and intergranular pores) and microcracks (along-layer, high pressure, structural, and mineral shrinkage cracks). Paleosalinity affects the pore throat characteristics of shale by controlling the mineral composition, rock combination type, and texture. Carbonate minerals tend to dissolve and form dissolution pores, resulting in pore throat enlargement and better physical properties. When salinity is low, the content of carbonate minerals increases with the increase in salinity. However, in the case of high salinity, the content of carbonate minerals gradually decreases, but that of sulfate and gypsum increases with the increase in salinity. The texture is conducive to the development of microcracks. With the increase in salinity, the number of textures first increases and then decreases. When the content is 15 ‰–30‰, there are most abundant textures, making it most likely to form microcracks. The results of this study play an important role in promoting the study of shale in the continental lacustrine basin.

Verified
Journal Article
Open access
PDF file
SLShengqian Liu
Shengqian Liu
YHYoubin He
Youbin He
ZZZhongxiang Zhao
Zhongxiang Zhao
YCYing Chen
Ying Chen
The Pearl River Mouth Basin (PRMB) had two potential provenances (intrabasinal and extrabasinal) during the Paleogene Enping Formation period. However, the understanding of their differences in source supply and evolution over time and space is limited due to the regional restriction in borehole coverage. This study aims to address the knowledge gap by utilizing detrital zircon U-Pb dating data, seismic data, and borehole data. Specifically, this study focuses on examining the characteristics of provenance evolution and sedimentary infilling within the Enping Formation in various sags of the northern PRMB. The results indicate temporal and spatial variability in provenance from the lower Ep4 and Ep3 to the upper Ep2 and Ep1 Members. The influence of extrabasinal provenance from the South China Block (SCB) was prominent in the northern region of the Zhu I Depression during the deposition of Ep4 and Ep3 Members, while intrabasinal provenance from local uplifts remained a significant source for most sags. During this period, sediment transportation occurred over short distances, leading to the widespread development of smaller fan deltas and braided river deltas. In contrast, extrabasinal provenance became dominant during the deposition of Ep2 and Ep1 Members throughout the entire Zhu I Depression. This shift promoted the development of large-scale, shallow, braided river deltas with sediment transported over long distances. The analysis reveals a close correspondence between the shifting provenance and the evolution of sedimentary infilling patterns in the PRMB. As a result, the sags transitioned from being under-filled or balanced-filled to being balanced-filled or over-filled. This study holds immense significance for oil and gas exploration as well as the prediction of favorable sedimentary sand bodies in offshore petroliferous basins.

17 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Jing WangJing Wang
Jing Wang
YHYoubin He
Youbin He
HLHua Li
Hua Li
BFBin Feng
Bin Feng
ZZZhongxiang Zhao
Zhongxiang Zhao
XHXiangyang Hou
Xiangyang Hou
The lower sub-member of Member 2, Dongying Formation (Paleogene) in the HHK Depression hosts an extensively developed thin-bedded beach-bar system characterized by favorable source rock conditions and reservoir properties, indicating significant hydrocarbon exploration potential. Integrating drilling cores, wireline log interpretations, three-dimensional seismic data, geochemical analyses, and palynological data, this study investigates the sedimentary characteristics, sandbody distribution patterns, controlling factors, and genetic model of this lacustrine beach-bar system. Results reveal the following: (1) widespread thin-bedded beach-bar sandbodies dominated by fine-grained sandstones and siltstones, exhibiting wave ripples and low-angle cross-bedding; (2) two vertical stacking patterns, Type A, thick mudstone intervals intercalated with laterally continuous thin sandstone layers, and Type B, composite sandstones comprising thick sandstone units overlain by thin sandstone beds, both demonstrating significant lateral continuity; (3) three identified microfacies: bar-core, beach-core, and beach-margin facies; (4) key controls on sandbody development: paleoenvironmental evolution establishing the depositional framework, secondary fluctuations modulating depositional processes, strike-slip extensional tectonics governing structural zonation, paleobathymetry variations and paleotopography controlling distribution loci, and provenance clastic influx regulating scale and enrichment (confirmed by detrital zircon U-Pb dating documenting a dual provenance system). Collectively, these findings establish a sedimentary model for a thin-bedded beach-bar system under the strike-slip extensional tectonic framework.