Estimating shear strength is a crucial aspect of beam design. The goal of this research is to develop a shear strength calculation technique for ultra-high performance fiber reinforced concrete (UHPFRC) beams. To begin, a shear test database of 200 UHPFRC beam specimens is established. Then, random forest (RF) is used to evaluate the importance of influence factors for the shear strength of UHPFRC beams. Subsequently, three machine learning (ML)-based models, including artificial neural network (ANN), support vector regression (SVR), and eXtreme-gradient boosting (XGBoost), are proposed to compute shear strength. Results demonstrate that the area of longitudinal reinforcement has the greatest influence on the shear capacity of UHPFRC beams, and ten parameters with high importance (e.g., the area of longitudinal reinforcement, the stirrup strength, the cross-section area, the shear span ratio, fiber volume fraction, etc.) are selected as input parameters. The models of ANN, SVR, and XGBoost have close accuracy, and their R² are 0.8825, 0.9016, and 0.8839, respectively, which are much larger than those of existing theoretical models. In addition, the average ratios of prediction values of ANN, SVR, and XGBoost models to experimental results are 1.08, 1.02, and 1.10, respectively; the coefficients of variation are 0.28, 0.21, and 0.28, respectively. The SVR model has the best accuracy and reliability. The accuracy and reliability of ML-based models are much better than those of existing models for calculating the shear strength of UHPFRC beams.

Three T-shaped concrete walls built with HRB 600 MPa reinforcement were tested under cyclic loading, and research parameters included axial load ratio and lateral loading direction. As part of the study, the method to obtain the yield strength and deformation was proposed. Test results show that compared to the specimen loaded along the web length direction, the wall loaded at 45° direction has smaller strength, initial stiffness, energy dissipation, and larger drift ratio capacity. The tension strength of HRB 600MPa reinforcement can be fully used in T-shaped walls. The method for yield strength and deformation has reasonable calculation accuracy.