The viability of thin-walled energy absorbers as impact attenuators for Formula Student car was examined in this study, specifically the crashworthiness of singular and bi-tubular tubes of varying geometries. 12 designs were lumped into 4 groups, consisting of 3 singular tubes and 9 bi-tubular tubes of varying shapes and dimensions, and they were axially crush-simulated in LS-DYNA. The tubes were set to 50mm long and made of aluminium 6061-T6. The LS-DYNA settings were validated using published experimental data of similar studies. The singular tubes were found to have the highest values of specific energy absorption (SEA), with the singular hexagonal tube design recording the highest value of SEA compared to the other designs. It was also observed that square-shaped geometries were the best in absorbing energy, especially a bi-tubular tube with outer and inner square geometries.
A computer vision system for measuring the displacement and bending angle of ionic polymer–metal composites (IPMC) was proposed in this study. The logical progression of measuring IPMC displacement and bending angle was laid out. This study used Python (version 3.10) in conjunction with OpenCV (version 4.5.5.64) for the development of the vision system. The coding functions and the mathematical formulas used were elaborated on. IPMC contour detection was discussed in detail, along with appropriate camera and lighting setups. Measurements generated from the vision system were compared to approximated values via a manual calculation method. Good agreement was found between the results produced by the two methods. The mean absolute error (MAE) and root mean squared error (RMSE) for the displacement values are 0.068080668 and 0.088160652, respectively, and 0.081544205 and 0.103880163, respectively, for the bending angle values. The proposed vision system can accurately approximate the displacement and bending angle of IPMCs.
Following the formulation development from a previous study utilising N-vinylcaprolactam (NVCL) and N-isopropylacrylamide (NIPAm) as monomers, poly(ethylene glycol) dimethacrylate (PEGDMA) as a chemical crosslinker, and Irgacure 2959 as photoinitiator, nanoclay (NC) is now incorporated into the selected formulation for enhanced mechanical performance and swelling ability. In this research, two types of NC, hydrophilic bentonite nanoclay (NCB) and surface-modified nanoclay (NCSM) of several percentages, were included in the formulation. The prepared mixtures were photopolymerised, and the fabricated gels were characterised through Fourier transform infrared spectroscopy (FTIR), cloud-point measurements, ultraviolet (UV) spectroscopy, pulsatile swelling, rheological analysis, and scanning electron microscopy (SEM). Furthermore, the effect of swelling temperature, NC types, and NC concentration on the hydrogels’ swelling ratio was studied through a full-factorial design of experiment (DOE). The successful photopolymerised NC-incorporated NVCL-NIPAm hydrogels retained the same lower critical solution temperature (LCST) as previously. Rheological analysis and SEM described the improved mechanical strength and polymer orientation of gels with any NCB percentage and low NCSM percentage. Finally, the temperature displayed the most significant effect on the hydrogels’ swelling ability, followed by the NC types and NC concentration. Introducing NC to hydrogels could potentially make them suitable for applications that require good mechanical performance.
9 November 2018 in IOP Conference Series: Materials Science and Engineering
The viability of thin-walled energy absorbers as impacts attenuators for Formula SAE racing cars was studied. The crashworthiness of bi-tubular tubes of varying geometries were explored. 9 designs grouped into 3 batches, were axially crush simulated in LS-Dyna. The tubes were set to 50mm long and made of aluminium 6061-T6. A convergence study was conducted, and the tubes were simulated using a meshing size of 1.5mm. The crushing energy applied is 490J. The LS-Dyna settings used were validated using experimental data from previous studies. It was found that the tube with an outer hexagon shape and an inner square shape had the best SEA. It was also observed that square-shaped geometries were the best in absorbing energy, with the most amount of energy being absorbed by a bi-tubular tube with outer and inner square geometries. Tubes with hexagonal geometries absorbed slightly less energy compared to tubes with square geometries, but they only differ by a small margin.