As an advanced technology, simultaneous wireless information and power transfer (SWIPT), combined with the internet of things (IoT) devices, can effectively extend the online cycle of the terminal. To cope with the fluctuation of energy harvesting by the hybrid access points (H-AP), the energy cooperation base station is introduced to realize the sharing of renewable energy. In this paper, we study the SWIPT-enabled IoT networks with cooperation. Our goal is to maximize the energy efficiency of the system, and at the same time, we need to meet the energy harvesting constraints, user quality of service (QoS) constraints and transmission power constraints. We jointly solve the power allocation, time switching and energy cooperation problems. Because this problem is a nonlinear programming problem, it is difficult to solve directly, so we use the alternating variable method, the iterative algorithm is used to solve the power allocation and time switching problem, and the matching algorithm is used to solve the energy cooperation problem. Simulation results show that the proposed algorithm has obvious advantages in energy efficiency performance compared with the comparison algorithm. At the same time, it is also proved that the introduction of energy cooperation technology can effectively reduce system energy consumption and improve system energy efficiency.
The extensive deployment of 5G cellular networks causes increased energy consumption and interference in systems, and to address this problem, this paper investigates the optimization problem of joint energy harvesting and energy cooperation to maximize energy efficiency (EE). First, considering user equipment (UE) quality of service (QoS) constraints, cellular base station power constraints, and renewable energy harvesting constraints, we construct a mixed-integer nonlinear programming problem for joint resource allocation. This problem is difficult to solve directly, thus we combine the fixed-variable method to solve the complex original problem in three less difficult subproblems of user association, power allocation, and energy cooperation by solving them separately using Lagrangian method, improved particle swarm optimization algorithm, and matching theory, respectively. Finally, the final solution to the original problem is obtained by combining the above three algorithms through convergent iterative algorithms. The simulation results show that the joint algorithm proposed in this paper has a better performance in throughput and energy efficiency compared with the comparison algorithms.
To solve the problems of interruption events and the high bit-error rate of the FSO system caused by atmospheric turbulence, an FSO cooperative communication scheme based on system polarization code is proposed. In this scheme, the upper limit of the average bit-error rate of the atmospheric turbulence channel is used to construct the frozen bit set of the system polarization code, and the information bit set of the link is recovered by using the ownership relationship between the frozen bit set of the link and the link at the destination node. Finally, the information bits of the link and link are combined using equal gain combination, and the original information is recovered by decoding. The simulation results show that the FSO cooperative communication system can overcome the influence of atmospheric turbulence and improve the system performance, and the bit-error rate performance of the FSO cooperative communication system can be improved by at least 0.5dB; the outage probability of the FSO cooperative communication system can be reduced to less than 10−7, and it shows a stable inhibitory effect on strong turbulence conditions.
In order to solve the problem of the high complexity of polarization code construction under free-space optical communication, this paper proposes a segmented turbulent partial order construction method, which effectively reduces the complexity of polarization code construction while obtaining the highest possible quality of communication performance. The method introduces the generalized partial order technique into the atmospheric strong turbulent channel, determines the reliability relationship between each sub-channel in the strong turbulence using Monte Carlo simulation, and combines it with the polarization weight formula to find the optimal parameter values in different signal-to-noise ratio ranges to construct the polarization code. The simulation results showed that the method had a similar communication performance compared with the conventional Monte Carlo construction method for different turbulence intensities, code rates, and code lengths, and its construction complexity was negligible due to its offline operation nature. For different code rate code lengths and BER of 10-4, this method generated about 0.03–0.17 dB loss compared with the Monte Carlo method; for different turbulence strengths and BER of 10-4, only a loss of about 0.05–0.07 dB was generated. It provides a solution for the efficient application of polarization codes under free-space optical communication.
To solve the problem that the channel conditions in asymmetric cooperative FSO communication systems are not fully utilized, and the data reliability deteriorates due to high-order modulation, we proposed a layered modulation, joint physical-layer network coding scheme. In this scheme, we first designate the data priority of the information to be transmitted at the source node. Then, the transmission power of different proportions is allocated to the data based on its priority. Then, the modulated data is sent to each node, and physical-layer network coding is performed on the received data at the relay node. Finally, the relay node sends the encoded information to the destination node, and the destination node recovers the original information using the physical-layer network coding scheme. The simulation results showed that when the average signal-to-noise ratio of the channel was 15 dB, the BER of the cooperative FSO communication system could be reduced to below . In the strong atmospheric turbulence channel, the cooperative FSO communication system can obtain a signal-to-noise ratio gain of about 1.5 dB. Under strong atmospheric turbulence, this scheme could also improve the average channel capacity performance of a cooperative FSO communication system.
An improved non-convex optimized phase recovery algorithm is used to compensate for wavefront aberrations caused by atmospheric turbulence and pointing errors in the vortex beam. The algorithm is divided into two parts: initialization and iteration. To reduce the effect of outliers, truncation rules are formulated in the initialization phase using the robustness of the sample median to obtain an initial value that is close to the global optimum. The relationship between the results of adjacent iterations is used in the iterations to calculate new weight coefficients, which are applied to the gradient descent to ensure the accuracy of the recovery results. Simulation experiments are carried out for different channel environments and different modes, and the results show that the improved phase recovery algorithm can accurately compensate for distorted wave fronts. The improved algorithm recovers the best results at different turbulence intensities and under the influence of different pointing errors. The recovered Strehl ratio can reach 0.9 and the mode purity can reach 0.92. Single-mode and multi-mode simulations were carried out, and the results show that the improved algorithm is effective and robust.