Anuruddha Bhattacharjee

Mr. Anuruddha Bhattacharjee

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2021 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
YLYitong Lu
Yitong Lu
ABAaron Becker
Aaron Becker
MinJun KimMinJun Kim
MinJun Kim
Reconfigurable modular robots, which can actively assemble and disassemble on command, offer the possibility of mesoscale (milliscale and microscale) manufacturing with robustness and controllability. In this study, we present a design of a scalable modular subunit with embedded permanent magnets in a 3-D printed cubic body. The subunit can be wirelessly controlled by an external uniform magnetic field. We also present controlled assembly–disassembly techniques for these subunits. Our modular robotic platform is highly reconfigurable and can create programmable, predetermined patterns based on open-loop control. The 2-D motion planner computes all reachable polyomino shapes from an arbitrary initial configuration and provides the shortest movement sequences to form each shape. Experimental results match computational modeling, demonstrating robust and reproducible behavior of the modular robotic platform that is promising for mesoscale manufacturing applications. Two cube sizes were tested: 10-mm edge lengths and 2.8-mm edge lengths.

17 February 2020 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
EKEhab Al Khatib
Ehab Al Khatib
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
PRPouria Razzaghi
Pouria Razzaghi
LRLouis William Rogowski
Louis William Rogowski
MinJun KimMinJun Kim
MinJun Kim
Yildirim HurmuzluYildirim Hurmuzlu
Yildirim Hurmuzlu
Magnetic millirobots can be controlled remotely by external magnetic fields, making them promising candidates for biomedical and engineering applications. This letter presents a low-cost millirobot that is simple in design, easy to fabricate, highly scalable, and can be used as modular sub-units within complex structures for large-scale manipulation. The rectangular-shaped millirobots were 3D printed using a polylactic acid (PLA) filament, where two cylindrical permanent magnets were subsequently embedded at each end. Individual millirobots are highly agile and capable of performing a variety of locomotive tasks such as pivot walking, tapping, and tumbling. A comparative study is presented to demonstrate the advantages and disadvantages of each locomotion mode. However, among these modes of locomotion, pivot walking at millimeter length scale is demonstrated for the first time in this letter, and our experimental data shows that this is the fastest and the most stable of the motion modes examined. Further, we demonstrate that the millirobot could be deployed through an esophagus-like bent tube and a maze-like path with combined motion modes. Later, to extend the functionality of our millirobots, we present two systems utilizing multiple millirobots combined together: a stag beetle and a carbot. Using a powerful electromagnetic coil system, we conduct extensive experiments to establish feasibility and practical utility of the magnetically actuated millirobot.

12 September 2022 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
MJMehdi Jabbarzadeh
Mehdi Jabbarzadeh
GKGokhan Kararsiz
Gokhan Kararsiz
HFHenry Fu
Henry Fu
MinJun KimMinJun Kim
MinJun Kim
This paper seeks to design, develop, and explore the locomotive dynamics and morphological adaptability of a bacteria-inspired rod-like soft robot propelled in highly viscous Newtonian fluids. The soft robots were fabricated as tapered, hollow rod-like soft scaffolds by applying a robust and economic molding technique to a polyacrylamide-based hydrogel polymer. Cylindrical micro-magnets were embedded in both ends of the soft scaffolds, which allowed bending (deformation) and actuation under a uniform rotating magnetic field. We demonstrated that the tapered rod-like soft robot in viscous Newtonian fluids could perform two types of propulsion; boundary rolling was displayed when the soft robot was located near a boundary, and swimming was displayed far away from the boundary. In addition, we performed numerical simulations to understand the swimming propulsion along the rotating axis and the way in which this propulsion is affected by the soft robot’s design, rotation frequency, and fluid viscosity. Our results suggest that a simple geometrical asymmetry enables the rod-like soft robot to perform propulsion in the low Reynolds number (Re ≪ 1) regime; these promising results provide essential insights into the improvements that must be made to integrate the soft robots into minimally invasive in vivo applications.

17 July 2023 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
YLYitong Lu
Yitong Lu
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
CTConlan C. Taylor
Conlan C. Taylor
JLJulien Leclerc
Julien Leclerc
JOJason O'Kane
Jason O'Kane
ABAaron Becker
Aaron Becker
Reconfigurable modular robots can dynamically assemble/disassemble to accomplish the desired task better. Magnetic modular cubes are scalable modular subunits with embedded permanent magnets in a 3D-printed cubic body and can be wirelessly controlled by an external, uniform, time-varying magnetic field. This letter considers the problem of self-assembling these modules into desired 2D polyomino shapes using such magnetic fields. Although the applied magnetic field is the same for each magnetic modular cube, we use collisions with workspace boundaries to rearrange the cubes. We present a closed-loop control method for self-assembling the magnetic modular cubes into polyomino shapes, using computer vision-based feedback with re-planning. Experimental results demonstrate that the proposed closed-loop control improves the success rate of forming 2D user-specified polyominoes compared to an open-loop baseline. We also demonstrate the validity of the approach over changes in length scales, testing with both 10 mm edge length cubes and 2.8 mm edge length cubes.

26 June 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
GKGokhan Kararsiz
Gokhan Kararsiz
YDYasin Cagatay Duygu
Yasin Cagatay Duygu
LRLouis William Rogowski
Louis William Rogowski
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
MinJun KimMinJun Kim
MinJun Kim
This paper demonstrates a manipulation of snowman-shaped soft microrobots under a uniform rotating magnetic field. Each microsnowman robot consists of two biocompatible alginate microspheres with embedded magnetic nanoparticles. The soft microsnowmen were fabricated using a microfluidic device by following a centrifuge-based microfluidic droplet method. Under a uniform rotating magnetic field, the microsnowmen were rolled on the substrate surface, and the velocity response for increasing magnetic field frequencies was analyzed. Then, a microsnowman was rolled to follow different paths, which demonstrated directional controllability of the microrobot. Moreover, swarms of microsnowmen and single alginate microrobots were manipulated under the rotating magnetic field, and their velocity responses were analyzed for comparison.

27 September 2021
Verified
Conference Paper
Closed access
YLYitong Lu
Yitong Lu
ABAnuruddha Bhattacharjee
Anuruddha Bhattacharjee
DBDaniel Biediger
Daniel Biediger
MinJun KimMinJun Kim
MinJun Kim
ABAaron Becker
Aaron Becker
This paper examines a family of designs for magnetic cubes and counts how many configurations are possible for each design as a function of the number of modules. Magnetic modular cubes are cubes with magnets arranged on their faces. The magnets are positioned so that each face has either magnetic south or north pole outward. Moreover, we require that the net magnetic moment of the cube passes through the center of opposing faces. These magnetic arrangements enable coupling when cube faces with opposite polarity are brought in close proximity and enable moving the cubes by controlling the orientation of a global magnetic field. This paper investigates the 2D and 3D shapes that can be constructed by magnetic modular cubes, and describes all possible magnet arrangements that obey these rules. We select ten magnetic arrangements and assign a "color" to each of them for ease of visualization and reference. We provide a method to enumerate the number of unique polyominoes and polycubes that can be constructed from a given set of colored cubes. We use this method to enumerate all arrangements for up to 20 modules in 2D and 16 modules in 3D. We provide a motion planner for 2D assembly and through simulations compare which arrangements require fewer movements to generate and which arrangements are more common. Hardware demonstrations explore the self-assembly and disassembly of these modules in 2D and 3D.