In this letter, a framework to optimize device association (DA), radio resource allocation (RA), and power allocation (PA) in heterogeneous cloud radio access network (H-CRAN) is proposed. In H-CRAN, small remote radio heads (SRRHs) are deployed underlaying the macro RHH (MRRH) to serve a group of SRRH devices (SDVs) by reusing the same radio resources allocated to MRRH devices (MDVs). The DA, RA, and PA optimization process is designed to maximize the network sum-rate while guaranteeing the rate requirements for SDVs, fronthaul capacity constraints, and MDVs interference protection. For DA and RA, an approach dependent on matching game is proposed to model the interactions between devices and SRRHs. In addition, Lagrangian dual decomposition is adopted to determine the optimum power allocation for each radio resource. Simulation results validate the superiority of the proposed algorithm compared to other schemes.
Coordinated multi-point (CoMP) has emerged as a promising concept for improving the overall network throughput, where each user is attached with a group of radio heads called a cluster. In this letter, a user-centric clustering scheme in cloud radio access network is proposed to consider the fairness between users while choosing the serving clusters. The CoMP clustering strategy is formulated as a cooperative bargaining game problem and resolved using Nash Bargaining Solution (NBS). First, the users are grouped into coalitions using Hungarian method. Then, a two-band partition algorithm is developed for the two users in each coalition to bargain their attached radio heads so that the NBS utility is maximized. Simulation results show that the proposed algorithm can achieve a considerable rate gain and fairness improvements compared to the existing schemes.
Millimetre wave (mmWave) transmission is considered as one of the potential technologies in fifth generation (5G) cellular networks that could allocate more bandwidth to support the rapid growth of mobile data services. However, mmWave signals experience large path loss which can overcome by employing directional beamforming with high‐dimensional antenna arrays. In this study, a downlink multiuser multiple‐input multiple‐output beamforming optimisation problem is considered for maximising the system utility subject to per‐user quality‐of‐service constraint as well as per‐antenna and base station transmit power constraints. The difficulty of this problem lies in its non‐convex nature. To address this challenge, a weighted minimum mean square error (WMMSE)‐based solution is proposed to reformulate the non‐convex problem into equivalent convex one. Then, the block coordinate descent method is used to determine beamforming vectors. Moreover, the different antenna array geometries either two‐dimensional (2D) such as planar array and circular array (CiA), or 3D such as conformal array and conical array (CoA) are designed at the base station and their effect on the system performance is exploited. Extensive simulations show that the performance of the proposed WMMSE‐based solution with CiA and CoA geometries outperforms the comparable algorithms in terms of system throughput, system power consumption and access rate.
The ubiquitous existence of COVID-19 has required the management of congested areas such as workplaces. As a result, the use of a variety of inspiring tools to deal with the spread of COVID-19 has been required, including internet of things, artificial intelligence (AI), machine learning (ML), and geofencing technologies. In this work, an efficient approach based on the use of ML and geofencing technology is proposed to monitor and control the density of persons in workplaces during working hours. In particular, the workplace environment is divided into a number of geofences in which each person is associated with a set of geofences that make up their own cluster using a dynamic user-centric clustering scheme. Different metrics are used to generate a unique geofence digital signature (GDS) such as Wi-Fi basic service set identifier, Wi-Fi received signal strength indication, and magnetic field data, which can be collected using the person’s smartphone. Then, these metrics are utilized by different ML techniques to generate the GDS for each indoor geofence and each building geofence as well as to detect whether the person is in their cluster. In addition, a Layered-Architecture Geofence Division method is considered to reduce the processing overhead at the person’s smartphone. Our experimental results demonstrate that the proposed approach can perform well in a real workplace environment. The results show that the system accuracy is about 98.25% in indoor geofences and 76% in building geofences.
Cloud radio access network (C‐RAN) has been introduced as a promising network paradigm for improving the spectral and energy efficiency of next‐generation mobile systems. In C‐RAN, the computation resources of the centralised baseband units (BBUs) can be virtualised and dynamically shared among cells for energy‐efficient BBU pool utilisation. In this study, a BBU virtualisation scheme is proposed to minimise the total power consumption in the BBU pool subject to constraints on users’ quality of service in terms of real‐time requirements, individual fronthaul capacity and BBU capacity. As the BBU processing time and transmission delay for each user data can be compromised to meet the user's real‐time requirements while minimising the BBU power consumption, a priori user association phase is proposed and formulated as an optimisation problem to maximise the users’ transmission rate, and hence minimising their transmission delay. Then, the BBU processing allocation phase is formulated as a bin‐packing problem to minimise the overall power consumption in the BBU pool. Since this problem is combinatorial, a heuristic algorithm is proposed based on best‐fit‐decreasing algorithm to solve it. Extensive simulations show that the proposed scheme outperforms the comparable ones in terms of power consumption with reduction up to 33%.
In this paper, we consider the joint transmission coordinated multi-point (CoMP) technique in a downlink heterogeneous cloud radio access network (C-RAN). The joint beamforming design and baseband unit (BBU) computational resources allocation problem in Heterogenous C-RAN is investigated. This problem is formulated as an optimization problem to minimize the overall system power consumption under per-user quality-of-service (QoS), fronthaul capacity, per-antenna transmit power and per-remote radio head (RRH) total transmit power constraints. The considered problem is a non-convex optimization problem due to the presence of the binary indicator in the fronthaul constraints. To address this challenge, we use the re-weighted l1-norm technique and reformulate the problem into a tractable form. Then, we transform the problem to a weighted sum mean square error (MSE) minimization problem and propose a weighted minimum mean square error (WMMSE) algorithm to solve it. Simulation results are provided to verify the effectiveness of the proposed algorithm.