Prediction of building energy consumption using mathematical modeling is crucial for improving the efficiency of building energy utilization, assisting in building energy consumption planning and scheduling, and further achieving the goal of energy conservation and emission reduction. In consideration of the non-linear and non-smooth characteristics of building energy consumption time series data, a short-term, hybrid building energy consumption prediction model combining variational mode decomposition (VMD), a simulated annealing (SA) algorithm, and a deep belief network (DBN) is proposed in this study. In the proposed VMD-SA-DBN model, the VMD algorithm decomposes the time series into different modes to reduce the fluctuation of the data. The SA-DBN prediction model is built for each mode separately, and the DBN network structure parameters are optimized by the SA algorithm. The prediction results of each model are aggregated and reconstructed to obtain the final prediction output. The validity and prediction performance of the proposed model is evaluated on a publicly available dataset, and the results show that the proposed new model significantly improves the accuracy and stability of building energy consumption prediction compared with several typical machine learning methods. The mean absolute percent error (MAPE) of the VMD-SA-DBN model is 63.7%, 65.5%, 46.83%, 64.82%, 44.1%, 36.3%, and 28.3% lower than that of the long short-term memory (LSTM), gated recurrent unit (GRU), VMD-LSTM, VMD-GRU, DBN, SA-DBN, and VMD-DBN models, respectively. The results will help managers formulate more-favorable low-energy emission reduction plans and improve building energy efficiency.
This paper proposes a method for classifying crystal planes based on the bond angle characteristics of quartz unit cells and constructs an etch rate model for quartz crystal planes at both macro and micro scales. By omitting oxygen atoms from the quartz cell structure, a method based on bond angle characteristics was established to partition the atomic arrangement of the crystal surface. This approach was used to analyze the etching processes of typical quartz crystal planes (R, r, m, and (0001)), approximating the etching process of crystals as a cyclic removal of certain bond angle characteristics on the crystal planes. This led to the development of an etch rate model based on micro-geometric parameters of crystal planes. Additionally, using the proposed bond angle classification method, the common characteristics of atomic configurations on the crystal plane surfaces within the X_cut type were extracted and classified into seven regions, further expanding and applying the etch rate model. The computational results of this model showed good agreement with experimental data, indicating the rationality and feasibility of the proposed method. These also provide a theoretical basis for understanding the microstructural changes during quartz-based MEMS etching processes.