Recently, the integration of distributed generators (DGs) in radial distribution systems (RDS) has been widely evolving due to its sustainability and lack of pollution. This study presents an efficient optimization technique named the honey badger algorithm (HBA) for specifying the optimum size and location of capacitors and different types of DGs to minimize the total active power loss of the network. The Combined Power Loss Sensitivity (CPLS) factor is deployed with the HBA to accelerate the estimation process by specifying the candidate buses for optimal placement of DGs and capacitors in RDS. The performance of the optimization algorithm is demonstrated through the application to the IEEE 69-bus standard RDS with different scenarios: DG Type-I, DG Type-III, and capacitor banks (CBs). Furthermore, the effects of simultaneously integrating single and multiple DG Type-I with DG Type-III are illustrated. The results obtained revealed the effectiveness of the HBA for optimizing the size and location of single and multiple DGs and CBs with a considerable decline in the system’s real power losses. Additionally, the results have been compared with those obtained by other known algorithms.
8 February 2023 in Neural Computing and Applications
Integrating distributed generations (DGs) into the radial distribution system (RDS) are becoming more crucial to capture the benefits of these DGs. However, the non-optimal integration of renewable DGs and shunt capacitors may lead to several operational challenges in distribution systems, including high energy losses, poor voltage quality, reverse power flow, and lower voltage stability. Therefore, in this paper, the multi-objective optimization problem is expressed with precisely selected three conflicting goals, incorporating the reduction in both power loss and voltage deviation and improvement of voltage stability. A new index for voltage deviation called root mean square voltage is suggested. The proposed multi-objective problems are addressed using two freshly metaheuristic techniques for optimal sitting and sizing multiple SCs and renewable DGs with unity and optimally power factors into RDS, presuming several voltage-dependent load models. These optimization techniques are the multi-objective thermal exchange optimization (MOTEO) and the multi-objective Lichtenberg algorithm (MOLA), which are regarded as being physics-inspired techniques. The MOLA is inspired by the physical phenomena of lightning storms and Lichtenberg figures (LF), while the MOTEO is developed based on the concept of Newtonian cooling law. The MOLA as a hybrid algorithm differs from many in the literature since it combines the population and trajectory-based search approaches. Further, the developed methodology is implemented on the IEEE 69-bus distribution network during several optimization scenarios, such as bi- and tri-objective problems. The fetched simulation outcomes confirmed the superiority of the MOTEO algorithm in achieving accurate non-dominated solutions with fewer outliers and standard deviation among all studied metrics.
15 October 2024 in Optimal Control Applications and Methods
The proportional integral derivative (PID) controller plays a crucial role in various industrial applications. However, conventional methods often fail to provide optimal parameter values. Therefore, this study proposes a novel version of the jellyfish search (JS) algorithm, the modified jellyfish search (mJS) algorithm, for optimally tuning PID controllers to regulate the speed of a direct current (DC) motor. The original JS algorithm is known for its nature‐inspired approach; however, it has limitations in terms of exploitation power. To address these issues, the proposed mJS incorporates quasi‐dynamic opposed‐based learning and a Weibull probability distribution. The objective function minimizes the integral of the time‐weighted absolute error (ITAE). The effectiveness of mJS was validated by solving the 23rd classical benchmark function, followed by a comparative analysis with contemporary optimization algorithms using stringent statistical criteria. Then mJS is then applied to optimize the PID parameters of three different DC motor models. Results show that the mJS outperforms the standard JS, gray wolf optimization (GWO), JAYA, and golden jackal optimization (GJO) for various performance indicators. Specifically, the best ITAE values were 3.274e6 for DC motor 1 using the JS algorithm, 0.002737 for DC motor 2 using the GJO algorithm, and 0.02785 for DC motor 3 using the mJS algorithm. Additionally, the mJS and JS algorithms reduced the settling time to 0.005 s for DC motor 1, whereas the best settling time of 0.325 s for DC motor 2 was achieved by the mJS algorithm, and a settling time of 1.19 s was recorded for DC motor 3 using both the mJS and JS algorithms. These findings underscore the practical importance of the developed optimizer in engineering applications and its significant contribution to the literature.