Recently, the integration of distributed generators (DGs) in radial distribution systems (RDS) has been widely evolving due to its sustainability and lack of pollution. This study presents an efficient optimization technique named the honey badger algorithm (HBA) for specifying the optimum size and location of capacitors and different types of DGs to minimize the total active power loss of the network. The Combined Power Loss Sensitivity (CPLS) factor is deployed with the HBA to accelerate the estimation process by specifying the candidate buses for optimal placement of DGs and capacitors in RDS. The performance of the optimization algorithm is demonstrated through the application to the IEEE 69-bus standard RDS with different scenarios: DG Type-I, DG Type-III, and capacitor banks (CBs). Furthermore, the effects of simultaneously integrating single and multiple DG Type-I with DG Type-III are illustrated. The results obtained revealed the effectiveness of the HBA for optimizing the size and location of single and multiple DGs and CBs with a considerable decline in the system’s real power losses. Additionally, the results have been compared with those obtained by other known algorithms.
Distributed generation (DG) is becoming a prominent key spot for research in recent years because it can be utilized in emergency/reserve plans for power systems and power quality improvement issues, besides its drastic impact on the environment as a greenhouse gas (GHG) reducer. For maximizing the benefits from such technology, it is crucial to identify the best size and location for DG that achieves the required goal of installing it. This paper presents an investigation of the optimized allocation of DG in different modes using a proposed hybrid technique, the tunicate swarm algorithm/sine-cosine algorithm (TSA/SCA). This investigation is performed on an IEEE-69 Radial Distribution System (RDS), where the impact of such allocation on the system is evaluated by NEPLAN software.
In this paper, the Archimedes optimization algorithm (AOA) is applied as a recent metaheuristic optimization algorithm to reduce energy losses and capture the size of incorporating a battery energy storage system (BESS) and photovoltaics (PV) within a distribution system. AOA is designed with revelation from Archimedes’ principle, an impressive physics law. AOA mimics the attitude of buoyant force applied upward on an object, partially or entirely dipped in liquid, which is relative to the weight of the dislodged liquid. Furthermore, the developed algorithm is evolved for sizing several PVs and BESSs considering the changing demand over time and the probability generation. The studied IEEE 69-bus distribution network system has different types of the load, such as residential, industrial, and commercial loads. The simulation results indicate the robustness of the proposed algorithm for computing the best size of multiple PVs and BESSs with a significant reduction in the power system losses. Additionally, the AOA algorithm has an efficient balancing between the exploration and exploitation phases to avoid the local solutions and go to the best global solutions, compared with other studied algorithms.
With the rapid growth of technology and population, there has been a corresponding increase in electricity demand and system load. To meet this demand, the installation of renewable energy sources (RESs), such as wind turbines (WTs) and photovoltaics (PVs), in distribution systems is widely accepted as the best solution. This paper proposes an efficient modified method called ESCSO, which combines the Sand Cat Swarm Optimizer (SCSO) and Marine Predators Algorithm (MBA) algorithms to obtain the optimal allocation of WT and PV in radial distribution systems (RDS), with and without inverters. The presented objective function considers system loss, variable load, and the probabilistic output of WT and PV over 24 hours. The IEEE 69-bus RDS is used as the test system, with its equality and inequality constraints. The ESCSO method is compared with the original SCSO and MBA algorithms to measure its efficiency. The results show that installing multiple WT and PV yields better results than using a single WT and PV in RDS. Furthermore, incorporating WT and PV with an enabling inverter yields better results than using WT and PV without an enabling inverter in RDS.