In shallow flow conditions, turbulence effects appear on a water surface as a form of irregularity of surface shape composed of a large number of fluctuating ripples. The intensity of such a fluctuation increases with the Froude number and also with the Reynolds number as can be observed in flooding river flow. In such a flow condition, surface irregularities are viewed as surface features or textures moving with the flow. Although there has been a discussion in terms of the traceability of surface features, the advection speed of surface features agrees well with the surface velocity from a practical point of view. Based on the assumption about the traceability of surface features, image-based techniques have been developed in the past decades. The space–time image velocimetry (STIV) is one of those techniques developed by Fujita et al. (Int J River Basin Man 5(2):105–114, 2007 ), with success of measuring river surface velocity distributions without seeding the flow. However, there is still some room for improvement in determining accurate surface velocity from a space–time image (STI) used in STIV. For that purpose, a novel technique was developed that utilizes the two dimensional auto-correlation function of the image intensity in an STI together with quality indices of STI. The performance of the new technique was verified using synthetic images as well as its application to the measurement of snowmelt flood.
Image-based river flow measurement methods have been attracting attention because of their ease of use and safety. Among the image-based methods, the space-time image velocimetry (STIV) technique is regarded as a powerful tool for measuring the streamwise flow because of its high measurement accuracy and robustness. However, depending on the image shooting environment such as stormy weather or nighttime, the conventional automatic analysis methods may generate incorrect values, which has been a problem in building a real-time measurement system. In this study, we tried to solve this problem by incorporating the deep learning method, which has been successful in the field of image analysis in recent years, into the STIV method. The case studies for the three datasets indicated that deep learning can improve the efficiency of the STIV method and can continuously improve performance by learning additional data. The proposed method is suitable for building a real-time measurement system because it has no tuning parameters that need to be adjusted according to the shooting conditions and the calculation speed is fast enough for real-time measurement.
The space time image velocimetry (STIV) technique is presented and shown to be a useful tool for extracting river flow information non-intrusively simply by taking surface video images. This technique is applied to measure surface velocity distributions on the Uono River on Honshu Island, Japan. At the site, various measurement methods such as a radio-wave velocity meter, an acoustic Doppler current profiler (ADCP) or imaging techniques were implemented. The performance of STIV was examined in various aspects such as a night measurement using a far-infrared-ray (FIR) camera and a comparison to ADCP data for checking measurement accuracy. All the results showed that STIV is capable of providing reliable data for surface velocity and water discharge that agree fairly well with ADCP data. In particular, it was demonstrated that measurements during the night can be conducted without any difficulty using an FIR camera and the STIV technique. In particular, using the FIR camera, the STIV technique can capture water surface features better than conventional cameras even at low resolution. Furthermore, it was demonstrated that measurements during the night can be conducted without any difficulty.
25 June 2020 in Measurement Science and Technology
Space-time image velocimetry (STIV) is a well-established image-based technique for measuring river surface flow from videos or image time series. Because the fundamental measurement mechanism is relatively simple, STIV has been used widely in research and for practical purposes in Japan and other countries. The advantage of STIV over other imaging techniques such as large-scale particle image velocimetry (LSPIV) is its robustness. More specifically, the streamwise velocity component can be efficiently estimated by simply measuring the slope appearing in a space-time image (STI) that represents the advection of surface textures. However, in the course of practical applications cases occur in which STIV yields erroneous results when the measurement conditions at the river site are not satisfactory for accurate measurements, such as when the water surface includes textures other than those directly related to turbulent advection. In this research, surface textures are classified into ten types and image filters based on wavenumber–frequency spectra are developed to improve the quality of the STI so that the texture contains only those features that represents the advection of surface turbulence. The quality of the STI can be improved with the filters and thus further increase the robustness of the measurement technique.
Space–time variation of the free-surface roughness pattern, due to sub-surface turbulence, is one of the most important features of turbulent open-channel flows. Despite its importance, the free-surface dynamics is not fully understood, especially regarding the advection and propagation features of surface variations. In this study, a direct numerical simulation of a smooth-wall turbulent open-channel flow allowing free-surface deformation was performed to investigate the dependence of the free-surface features on Reynolds and Froude numbers. The results show that the key features of the free surface are due to surface waves and turbulence, and one or another may prevail depending on the Froude number. While the turbulence is dominant in subcritical flow at low Froude number, the surface waves propagating upstream become more dominant at high Froude number when flow becomes supercritical. Furthermore, it was found that the advection velocity of the roughness patterns becomes slower than the mean surface velocity in the flow where the surface waves become dominant.