Owing to weak light-matter interactions in natural materials, it is difficult to dynamically tune and switch emission polarization states of plasmonic emitters (or antennas) at nanometer scales. Here, by using a control laser beam to induce a bubble (n=1.0) in water (n=1.333) to obtain a large index variation as high as |Δn|=0.333, the emission polarization of an ultra-small plasmonic emitter (~0.4λ2) is experimentally switched at nanometer scales. The plasmonic emitter consists of two orthogonal subwavelength metallic nanogroove antennas on a metal surface, and the separation of the two antennas is only sx=120 nm. The emission polarization state of the plasmonic emitter is related to the phase difference between the emission light from the two antennas. Because of a large refractive index variation (|Δn|=0.333), the phase difference is greatly changed when a microbubble emerges in water under a low-intensity control laser. As a result, the emission polarization of the ultra-small plasmonic emitter is dynamically switched from an elliptical polarization state to a linear polarization state, and the change of the degree of linear polarization is as high as Δγ≈0.66.
Metalenses provide a powerful paradigm for mid-infrared (MIR) imaging and detection while keeping the optical system compact. However, the design of MIR metalenses simultaneously correcting chromatic aberration and off-axis monochromatic aberration remains challenging. Here, we propose an MIR doublet metalens composed of a silicon aperture metalens and a silicon focusing metalens separated by a fused silica substrate. By performing ray-tracing optimization and particle-swarm optimization, we optimized the required phase profiles as well as the sizes and spatial distributions of silicon nanopillars of the doublet metalens. Simulation results showed that the MIR doublet metalens simultaneously achieved chromatic and off-axis monochromatic aberration reduction, realizing a continuous 400 nm bandwidth and 20° field-of-view (FOV). Thanks to its planar configuration, this metalens is suitable for integration with CMOS image sensor to achieve MIR imaging and detection, which has potential application in troubleshooting and intelligent inspection of power grids. This work may facilitate the practical application of metalens-integrated micro/nanosensors in intelligent energy.
25 March 2022 in IEEE Antennas and Wireless Propagation Letters
Microwave sensors with low cost and high compatibility show great potential in the areas of environmental monitoring, food safety, and biomedical diagnostics. However, small microwave sensors using asymmetric antenna structures exhibit large fabrication difficulties or low figure of merits (FOMs). Here, we propose the Fano-resonant spiral dipole antenna (~ 0/13). In the antenna, a Fano resonance with a narrow bandwidth (~ f0/640) and high spectral contrast (C 1.0) is supported. In particular, an antenna array is used to improve the transmission efficiency (5-fold enhancement). Based on the Fano-resonant spiral dipole antenna, ultrahigh FOM microwave sensors are successfully realized. The Sensing FOM of the sensors can reach up to 252 RIU-1 and 172 RIU-1, respectively, which are more than 9 times those of the other sensors.
Spectral routing techniques have attracted plenty of research attention for the past decades, as they enable light manipulation in both the frequency domain and the spatial domain, which is crucial for applications in on-chip spectroscopy, optical switching, and modern communications. Here, we demonstrate an ultra-compact asymmetric nanoplasmonic router for communication bands that routes O and C bands to opposite positions. The nanorouter consists of two uneven grooves that create bidirectional scattered optical fields, utilizing the interference between different optical modes inside the grooves. A broadband spectrum exceeding 100 nm and a maximum extinction ratio of 31 dB are achieved, providing new opportunities for nanophotonic color routing solutions and extensions to other areas such as imaging sensors and spectral measurements.