A femtosecond laser–based optical frequency synthesizer is referenced to an optical standard, and we use it to demonstrate the generation and control of the frequency of electromagnetic fields over 100 terahertz of bandwidth with fractional uncertainties approaching 1 part in 10 19 . The reproducibility of this performance is verified by comparison of different types of femtosecond laser–based frequency synthesizers from three laboratories.
We describe a VLBI experiment in which, for the first time, the clock reference is delivered from a National Metrology Institute to a radio telescope using a coherent fibre link 550 km long. The experiment consisted of a 24-hours long geodetic campaign, performed by a network of European telescopes; in one of those (Medicina, Italy) the local clock was alternated with a signal generated from an optical comb slaved to a fibre-disseminated optical signal. The quality of the results obtained with this facility and with the local clock is similar: interferometric fringes were detected throughout the whole 24-hours period and it was possible to obtain a solution whose residuals are comparable to those obtained with the local clock. These results encourage further investigation of the ultimate VLBI performances achievable using fibre dissemination at the highest precision of state-of-the-art atomic clocks.
An imaging spectrometer based on a Fabry-Perot interferometer is presented. The Fabry-Perot interferometer scans the mirror distance up to contact and the intensity modulated light signal is transformed using a Fourier Transform based algorithm, as the Michelson based Fourier Transform Spectrometers does. The resulting instrument has the advantage of a compact, high numerical aperture, high luminosity hyperspectral imaging device. Theory of operation is described along with one experimental realization and preliminary results.
15 January 2007 in IEEE Journal of Quantum Electronics
We present measurements and analysis of the currently known relative frequency uncertainty of femtosecond laser frequency combs (FLFCs) based on Kerr-lens mode-locked Ti:sapphire lasers. Broadband frequency combs generated directly from the laser oscillator, as well as octave-spanning combs generated with nonlinear optical fiber are compared. The relative frequency uncertainty introduced by an optically referenced FLFC is measured for both its optical and microwave outputs. We find that the relative frequency uncertainty of the optical and microwave outputs of the FLFC can be as low as 8times10-20 and 1.7times10-18, with a confidence level of 95%, respectively. Photo-detection of the optical pulse train introduces a small amount of excess noise, which degrades the stability and subsequent relative frequency uncertainty limit of the microwave output to 2.6times10-17