This paper develops wave-optics simulations which explore the estimation accuracy of digital-holographic detection for wavefront sensing in the presence of distributed-volume or “deep” turbulence and detection noise. Specifically, the analysis models spherical-wave propagation through varying deep-turbulence conditions along a horizontal propagation path and formulates the field-estimated Strehl ratio as a function of the diffraction-limited sampling quotient and signal-to-noise ratio. Such results will allow the reader to assess the number of pixels, pixel field of view, pixel-well depth, and read-noise standard deviation needed from a focal-plane array when using digital-holographic detection in the off-axis image plane recording geometry for deep-turbulence wavefront sensing.
In this paper, we quantify the benefits of compensated-beacon adaptive optics (CBAO) relative to uncompensated-beacon adaptive optics (UBAO) using wave-optics simulations. Throughout, we present results for both the Shack-Hartmann wavefront sensor (SH-WFS) and the digital-holographic wavefront sensor (DH-WFS). Given weak to moderately strong scintillation conditions, the results show that the two noiseless sensors offer similar performance in terms of the peak Strehl ratio when using similar subaperture sampling and least-squares phase reconstruction. Specifically, CBAO leads to an average performance boost of 17% for the SH-WFS and 26% for the DH-WFS relative to UBAO for the turbulence scenarios studied here.
This paper uses wave-optics and signal-to-noise models to explore the estimation accuracy of digital-holographic detection in the off-axis pupil plane recording geometry for deep-turbulence wavefront sensing. In turn, the analysis examines three important parameters: the number of pixels across the width of the focal-plane array, the window radius in the Fourier plane, and the signal-to-noise ratio. By varying these parameters, the wave-optics and signal-to-noise models quantify performance via a metric referred to as the field-estimated Strehl ratio, and the analysis leads to a method for optimal windowing of the turbulence-limited point spread function. Altogether, the results will allow future research efforts to assess the number of pixels, pixel size, pixel-well depth, and read-noise standard deviation needed from a focal-plane array when using digital-holographic detection in the off-axis pupil plane recording geometry for estimating the complex-optical field when in the presence of deep turbulence and detection noise.
7 December 2020 in IEEE Transactions on Computational Imaging
In order to image a distant object through atmospheric turbulence, it is necessary to correct for the phase errors that would otherwise cause rapidly varying spatial blur in a conventionally focused image. One approach to solving this problem is to illuminate an object with coherent light and to use a digital holography (DH) receiver to form a coherent measurement. The associated amplitude and phase can then be used with model-based iterative reconstruction (MBIR) frameworks to estimate and correct for atmospheric phase errors from single-shot DH data (i.e., one sensor measurement). In this work, we present a new approach for the reconstruction of optically-coherent images from single-shot DH data in the presence of atmospheric turbulence, referred to as Coherent Plug-and-Play (C-PnP). Our algorithm integrates a convolutional neural network (CNN) image model with physics-based models for image reconstruction from DH data corrupted by atmospheric phase errors. C-PnP combines the modeling power of deep neural networks with the accuracy of existing physics models. Based on an extension of the plug-and-play framework, C-PnP uses multi-agent consensus equilibrium to balance the influence of these models. When compared with an existing approach using a simple image model, C-PnP improves image quality by a factor of 2.2× and phase-error correction by a factor of 2.9×, on average. We obtain these results by considering a wide range of images, signal levels, and phase-error strengths.
In this paper, atmospheric optical turbulence strength is estimated for realistic airborne environments using a modified phase-variance approach, as well as a modified slope-discrepancy approach. Realistic airborne environments are generated using wave-optics simulations of a plane wave propagating through increasing strengths of homogeneous atmospheric optical turbulence, both with and without aero-optical contamination (from in-flight wavefront sensor data) and additive-measurement noise. In comparison to the modified phase-variance approach, the results show that the modified slope-discrepancy approach more accurately estimates atmospheric optical turbulence strength over a wide range of conditions. Such results are encouraging for realistic airborne environments because they can be scaled to different freestream conditions as long as the boundary layer is considered canonical.
Tiled arrays use modulo-2π phase compensation and coherent beam combination to correct for the effects of deep turbulence. As such, this paper uses wave-optics simulations to compare the closed-loop performance of tiled arrays to a branch-point-tolerant phase reconstructor known as LSPV+7 [ Appl. Opt. 53, 3821 (2014)10.1364/AO.53.003821 ]. The wave-optics simulations make use of a point-source beacon and are setup with weak-to-strong scintillation conditions. This setup enables a trade-space exploration in support of a power-in-the-bucket comparison with LSPV+7. In turn, the results show that tiled arrays outperform LSPV+7 when transitioning from weak-to-strong scintillation conditions. These results are both encouraging and informative for those looking to tackle the branch-point problem in adaptive optics.