Monitoring the health of electric motor insulation by measuring the early breakdown phenomenon such as Partial discharge (PD) is required for the safer operation of electric vehicles (EVs). The prediction of partial discharge inception voltage (PDIV) is of great significance to evaluate the condition of motor insulation. This paper presents a method to predict the PDIV of electric motor magnetic wires winding. The data is driven by constructing a single point discharge model of turn-to-turn insulation of two magnetic wires. The model is simulated by varying the input parameters of magnetic wire configuration such as diameter, insulation thickness, winding temperature and insulation permittivity to calculate the PDIV based on Townsend discharge theory. The calculated PDIVs are used to train the convolution neural network (CNN)and extract the nonlinear relationship between characteristic variables and PDIV to test it for large data sets of magnetic wire. The predicted value is compared with the measured value, which proves the superiority and accuracy of the method in this paper. Based on the calculation results of the mean impact value algorithm, a method to improve the PDIV of the turn-to-turn insulation is given.
17 June 2024 in Journal of Vacuum Science & Technology A
Insulating ceramics are widely used in power systems, but their high polarity makes them prone to wet and pollution flashover. In this paper, an Ar/polydimethylsiloxane dielectric barrier discharge excited by a parametric nanosecond-pulse power source is utilized for plasma polymerization to enhance ceramic surface insulating performance. Diagnosis of the discharge characteristics and surface physiochemical properties is conducted at different repetition frequencies to investigate the mechanism associated with the relationship between repetition frequency and the plasma polymerization process. The results indicate that a superhydrophobic surface can be achieved at repetition frequencies above 2 kHz. This transformation brings about multiple effects, including a decrease in surface polarity, an increase in charge dissipation, and an improvement in surface dry and wet flashover voltages. It is discovered that the discharge mode shifts from homogeneous to filamentary due to the memory effect of high repetition frequencies. Additionally, several filaments are generated simultaneously during a single pulse, facilitating the polymerization reactions. For high repetition frequencies, a low-polarity silicon-containing film with micro-nanometer structures is deposited on the ceramic surface, while scattered polymer fragments are generated on the surface without a cross-linked film for repetition frequencies below 2 kHz, despite longer treatment durations.
Air switch cabinets are widely employed in the power industry, there is, however, no reliable methods for detecting partial discharges (PDs). Because fiber optic-based sensors are easy to install and have anti-electromagnetic interference capabilities, they are well suited for PDs detection in switch cabinets with their many components and metal shell structure. In this work, corona discharge in an air switch cabinet was detected using fluorescent fiber, and the characteristics of PDs were analyzed. Furthermore, experimental investigations were conducted to explore the impact of gas pressure and fiber length on the PDs detection. The results exhibit a correlation between the aforementioned factors and the PDs’ total amplitude, maximum amplitude, number of pulses and detection limit of PD quantity. The results can provide references for the application of fluorescent optical fiber on the PD detection in air switch cabinet.
24 July 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
Carbon fouling readily occurs on insulating ceramic surfaces of spark plugs due to high polarity, leading to decreased resistance, increased leakage current, and smaller ignition power. In this study, a silicon-oxide film is deposited on ceramic with an Ar/PDMS atmospheric pressure plasma jet to reduce surface polarity and increase surface resistance. The relationships between PDMS flow rate and surface performance, including surface polarity, surface resistance, leakage current, and flashover voltage, are obtained by varying the PDMS flow rate from 0 to 30 mL/min. Surface physiochemical characteristic variations of treated ceramics are analyzed to investigate the mechanism for surface performance enhancement. The results indicate that the optimal surface performance is obtained at a PDMS flow rate of 18 mL/min, with increased surface resistivity by 12.6 times, decreased polarity by 91.8%, and increased flashover voltage by 19.7%. Under optimal PDMS flow, a micro-nano double-scale structured film with low-polar Si-containing groups is deposited on the surface, introducing deep traps that enhance the surface charge binding and increase the surface resistance.