Existing fractured gas reservoir development techniques are mainly based on dual medium numerical-simulation models, which can, to a certain extent, effectively simulate natural fractures with high fracture density; however, these models have some limitations, particularly in terms of simulating the fracture morphology and distribution. Considering carbonate gas reservoirs with complex fractures, in this paper, we establish a numerical-simulation model of embedded discrete-fracture seepage in horizontal wells of carbonate gas reservoirs, in order to compare and study the development effect of carbonate gas reservoirs under different horizontal well fracture parameters. The fracture distribution and structure in carbonate gas reservoirs is obtained using an ant-tracking approach based on 3D seismic bodies, and a numerical-simulation model based on the embedded discrete-fractures model is solved using the open-source program MRST. We considered the following parameters: half fracture length, fracture permeability, and horizontal segment length. By changing the fracture parameters of horizontal wells and comparing the gas-production trends, technical optimization in gas reservoir development can be realized. The results show that the embedded discrete-fracture model can effectively solve the difficult problem of characterizing fluid seepage in fractures of different scale in carbonate gas reservoirs. Although gas production increases with increasing fracture length, fracture conductivity, horizontal section length, and natural fracture conductivity, the contributions of these parameters to gas well production capacity are greatly influenced by the natural fractures.
Hydraulic fracturing horizontal well is the key technology of tight gas development. After fracturing, the gas well shows the characteristics of great difference in production energy and many factors affecting production capacity. Therefore, taking 10 fractured horizontal wells in JQ gas field in Sichuan Basin as an example, comprehensively considering the influence of geological and engineering factors, and based on the statistical analysis of gas well productivity and the laws of various index parameters, 17 geological and engineering parameters were selected, and the main factors controlling productivity were studied by grey correlation method. The results show that the tight gas fracturing horizontal well can obtain high production, which is jointly determined by geological and engineering factors. The five main control factors affecting the productivity of tight gas fracturing horizontal well are as follows: proppant type, preflush, ϕ·h. Sand volume and reservoir volume.
Horizontal well and large-scale hydraulic fracturing are the main technical means for tight gas development at present. However, tight gas reservoirs are characterized by strong heterogeneity, and different types of gas Wells have different production characteristics and pressure propagation laws. In view of the above problems, based on the physical characteristics and reservoir reconstruction evaluation of tight gas reservoir in GAS Reservoir A in Sichuan Basin, three types of reservoir hydraulic fracture models and numerical simulation models were generated by using numerical simulation method, and the production dynamic prediction and pressure wave propagation law were studied. The simulation results show that: (1) In the beginning of production, the deflated area is mainly hydraulic fracture reconstruction area, and the drainage radius of all kinds of gas Wells expands at similar speed; (2) When the drainage range is expanded in the untransformed area, the dimensionless drainage radius expansion speed of gas well is positively correlated with the reservoir physical property. The dimensionless drainage radius and drainage area of class I and II horizontal Wells are relatively faster, while that of Class III Wells is slightly slower.