Kawalec Michał

Dr. Kawalec Michał


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2023 in Journal of Propulsion and Power
Verified
Journal Article
Closed access
KMKawalec Michał
Kawalec Michał
PWPiotr Wolanski
Piotr Wolanski
WPWitold Perkowski
Witold Perkowski
ABAdam Bilar
Adam Bilar
This paper presents work on a demonstrator rocket powered by a rotating detonation engine (RDE) fed by liquid propellants. Key to the success of the project was the development of a suitably efficient and lightweight RDE. After selecting the propellants: nitrous oxide ([ ]) and propane ([ ]), laboratory tests were carried out on RDEs with different combustion chamber geometries. The conical geometry showed the best performance, and it was selected for further development; on this basis, the target RDE was designed and built in two versions: uncooled and regeneratively cooled. These were tested in laboratory conditions, but only the regeneratively cooled engine met the requirements. After successful laboratory testing of the engine, a demonstration rocket was designed and built. Static tests made in a vertical position confirmed that the rocket had sufficient operational performance (net thrust and total impulse). Ultimately, the liquid-propellant RDE-powered rocket made a successful flight. To the authors’ knowledge, it was the first liquid-fuel rocket in the world to take off and fly exclusively by means of RDE propulsion.

2 January 2022 in Combustion Engines
Verified
Journal Article
Open access
KMKawalec Michał
Kawalec Michał
WPWitold Perkowski
Witold Perkowski
BŁBorys Łukasik
Borys Łukasik
ABAdam Bilar
Adam Bilar
PWPiotr Wolanski
Piotr Wolanski
In the paper short information about advantages of introduction of detonation combustion to propulsion systems is briefly discussed and then research conducted at the Łukasiewicz-Institute of Aviation on development of the rotating detonation engines (RDE) is presented. Special attention is focused on continuously rotating detonation (CRD), since it offers significant advantages over pulsed detonation (PD). Basic aspects of initiation and stability of the CRD are discussed. Examples of applications of the CRD to gas turbine and rocket engines are presented and a combine cycle engine utilizing CRD are also evaluated. The world's first rocket flight powered by liquid propellant detonation engine is also described.

1 April 2024 in Shock Waves
Verified
Journal Article
Open access
PDF file
WPW. Perkowski
W. Perkowski
ABA. Bilar
A. Bilar
MAM. Augustyn
M. Augustyn
KMKawalec Michał
Kawalec Michał
Experimental results are presented for a rotating detonation engine supplied with liquid kerosene and preheated air without liquid or gaseous additions to the propellant mixture. Various combustion modes for the generic combustor geometry design were observed—from deflagration, through pulsed combustion and high-frequency instabilities, to stable detonation propagation. Attention was paid to detonation stability (if present), its characteristics, and the propulsive performance of the combustor with a focus on specific thrust and pressure gain through thrust and outlet total pressure measurement. These parameters measured for the observed modes were compared. The stability of the detonation combustion proved not to be critical to achieve high performance of the combustion chamber. For example, high performance was achieved for combustion modes with high-frequency instabilities.

1 June 2021 in Transactions on Aerospace Research
Verified
Journal Article
Open access
PDF file
PGPaweł Głowacki
Paweł Głowacki
PKPiotr Kalina
Piotr Kalina
KMKawalec Michał
Kawalec Michał
This article examines, based on the available information and authors’ self-assessments, the environmental impact of turbine engine exhaust gases effect on the environment in the airport space during engines flight phases in the landing and takeoff cycle (LTO). The attention of aviation professionals is drawn to the fact that the amount of exhaust from the turbine engine is so significant that it may adversely change the ambient air at the airport. Consequently, increased emission level of carbon monoxide (CO), hydrocarbons (HC) during engine start-up and idle may pose a threat to the health of ramp staff. Also, high emission levels of nitrogen oxides (NOx) during takeoff, climb, cruise and descent is not without importance for the environment around the airport space. The paper gives CO2, HC, CO and NOx emission estimations based on ICAO Engine Emission Data Bank and the number of passenger operations at a medium-sized airport. It also provides calculation results of aircraft CO2, HC, CO and NOx emission using average times of aircraft maneuvers taken from aircraft Flight Data Recorder (FDR) in the LTO cycle various aircraft types at the airport. The latter, based on actual maneuvering times, lead to significantly reduced estimates of toxic exhaust gas emission volumes.

1 June 2022 in Transactions on Aerospace Research
Verified
Journal Article
Open access
PDF file
PGPaweł Głowacki
Paweł Głowacki
PKPiotr Kalina
Piotr Kalina
KMKawalec Michał
Kawalec Michał
An airport authority needs accurate information about the actual amount of harmful emissions being generated within its airspace, to be able to take measures leading to their reduction. This article presents two methods for estimating the amount of these emissions from aircraft engines during the take off and landing cycle (LTO) in the airspace of a medium-sized airport: one based on the total amount of the aircraft annually operated in it, and a second, more precise, one for a specific airline annually operating at this airport. The conclusions stemming from the comparison of these methods can support the introduction of operational and technical procedures reducing harmful emissions in the airport airspace during LTO cycle.

1 March 2026 in Transactions on Aerospace Research
Verified
Journal Article
Open access
PDF file
RORin Okada
Rin Okada
EDEdyta Dzieminska
Edyta Dzieminska
KMKawalec Michał
Kawalec Michał
WCWenjing Cao
Wenjing Cao
Rotating Detonation Engines (RDEs) utilize supersonic combustion to enhance propulsion efficiency while enabling simplified engine architectures. However, in a conventional annular RDE, the central plug reduces thrust density compared to alternative propulsion concepts. To address this limitation, a nested double annular combustion chamber is proposed. This study evaluates the feasibility and performance of the configuration using two-dimensional axisymmetric computational fluid dynamics (CFD) simulations in ANSYS Fluent. Comparative numerical analyses of single- and double-chamber models were conducted under identical mass flux conditions. The results indicate that the proposed double-chamber configuration achieves comparable performance and can even outperform the single-chamber annular RDE by up to 2.26% in thrust per chamber area. These findings provide valuable insight into the potential of nested annular RDE configurations for improving thrust density and propulsion system compactness in future propulsion applications.