Vibration energy harvesting is receiving a considerable amount of interest as a means for powering wireless sensor nodes. This paper presents a small (component volume 0.1 cm3, practical volume 0.15 cm3) electromagnetic generator utilizing discrete components and optimized for a low ambient vibration level based upon real application data. The generator uses four magnets arranged on an etched cantilever with a wound coil located within the moving magnetic field. Magnet size and coil properties were optimized, with the final device producing 46 µW in a resistive load of 4 k! from just 0.59 m s! 2 acceleration levels at its resonant frequency of 52 Hz. A voltage of 428 mVrms was obtained from the generator with a 2300 turn coil which has proved sufficient for subsequent rectification and voltage step-up circuitry. The generator delivers 30% of the power supplied from the environment to useful electrical power in the load. This generator compares very favourably with other demonstrated examples in the literature, both in terms of normalized power density and efficiency. (Some figures in this article are in colour only in the electronic version)

As MEMS and Smart Material technologies advance, embedded and remote applications are becoming more widespread. Powering these systems can be a significant engineering problem, as traditional solutions such as batteries are not always appropriate. An inertial generator is developed that uses thick-film piezoelectric technologies to produce electrical power from vibrations in the environment of the device. The device validates the concept, and produces an output of 3 µW. Predictions show that orders of magnitude increase in power output are possible.