The betterment of turbine performance plays a prime role in all future transportation and energy production systems. Precise uncertainty quantification of experimental measurement of any performance differential is therefore essential for turbine development programs. In this paper, the uncertainty analysis of loss measurements in a high-pressure turbine vane is presented. Tests were performed on a stator geometry at engine representative conditions in a new annular turbine module called BRASTA (big rig for annular stationary turbine analysis) located within the Purdue Experimental Turbine Aerothermal Lab. The aerodynamic probes are described, with emphasis on their calibration and uncertainty analysis, first considering single point measurement, followed by the spatial averaging implications. The change of operating conditions and flow blockage due to measurement probes are analyzed using computational fluid dynamics, and corrections are recommended on the measurement data. The test section and its characterization are presented, including calibration of the sonic valve. The sonic valve calibration is necessary to ensure a wide range of operation in Mach and Reynolds. Finally, the vane data are discussed, emphasizing their systematic and stochastic uncertainty.
Particle image velocimetry (PIV) is a well-established technique for determining the flow direction and velocity magnitude of complex flows. This paper presents a methodology for executing this nonintrusive measurement technique to study a scaled-up turbine vane geometry within an annular cascade at engine-relevant conditions. Custom optical tools such as laser delivery probes and imaging inserts were manufactured to mitigate the difficult optical access of the test section and perform planar PIV. With the use of a burst-mode Nd: YAG laser and Photron FASTCAM camera, the frame straddling technique is implemented to enable short time intervals for the collection of image pairs and velocity fields at 10 kHz. Furthermore, custom image processing tools were developed to optimize the contrast and intensity balance of each image pair to maximize particle number and uniformity while removing scattering and background noise. The preprocessing strategies significantly improve the vector yield under challenging alignment, seeding, and illumination conditions. With the optical and software tools developed, planar PIV was conducted in the passage of a high-pressure stator row, at midspan, in an annular cascade. Different Mach and Reynolds number operating conditions were achieved by modifying the temperature and mass flow. With careful spatial calibration, the resultant velocity vector fields are compared with Reynolds-averaged-Navier–Stokes (RANS) simulations of the vane passage with the same geometry and flow conditions. Uncertainty analysis of the experimental results is also presented and discussed, along with prospects for further improvements.
Efficiency is an essential metric for assessing turbine performance. Modern turbines rely heavily on numerical computational fluid dynamics (CFD) tools for design improvement. With more compact turbines leading to lower aspect ratio airfoils, the influence of secondary flows is significant on performance. Secondary flows and detached flows, in general, remain a challenge for commercial CFD solvers; hence, there is a need for high-fidelity experimental data to tune these solvers used by turbine designers. Efficiency measurements in engine-representative test rigs are challenging for multiple reasons; an inherent problem to any experiment is to remove the effects specific to the turbine rig. This problem is compounded by the narrow uncertainty band required to detect the incremental improvements achieved by turbine designers. Efficiency measurements carried out in engine-representative turbine rigs have traditionally relied upon assumptions such as constant gas properties and neglecting heat loss. This research presents an uncertainty framework that combines inputs from experiments and computational tools. This methodology allows quantifying uncertainty for high-fidelity efficiency data in engine-representative turbine facilities. This paper presents probabilistic sampling techniques to allow for uncertainty propagation. The effect of rig-specific effects, such as heat transfer and gas properties, on efficiency is demonstrated. Sources of uncertainty are identified, and a framework is presented which divides the sources into bias and stochastic. The framework allows the combination of experimental and numerical uncertainty. Gaussian regression models are developed to obtain speed-lines for the turbine map using the uncertainty of the measured efficiency.
Particle Image Velocimetry (PIV) is a well-established technique for determining the flow direction and velocity magnitude of complex flows. This paper presents a methodology for executing this non-intrusive measurement technique to study a scaled-up turbine vane geometry within an annular cascade at engine-relevant conditions. Custom optical tools such as laser delivery probes and