Soil-cutting forces are key indicators of root-tuber harvesters and other soil-engaging tools’ performance. To improve operational efficiency, minimise soil disturbance, and reduce fuel consumption, the draught and vertical forces involved in root and tuber crop harvesting must be minimised. Two field experiments assessed the harvester’s performance at a depth of 200 mm, varying frequencies, and travel speeds on clay and sandy loam soils. Discrete element models (DEM) were developed and subsequently used to replicate the field experiments and evaluate S-shaped and fork-shaped shovels. Linear regression and ANOVA (p < 0.05) were used to analyse the data. Draught force concurrently increased with speed in both soil textures but decreased with vibration frequency. The draught force decreased by approximately 41% in clay soil and 21% in sandy loam soil when the harvester was operated between 5 Hz and 14.5 Hz and between 10 Hz and 12.5 Hz, respectively. DEM simulations had relative errors of 4% (clay) and 4.7% (sandy loam) for draught force and drawbar power compared to experimental data. The S-shaped shovel was more efficient at crushing and translocating soil–crop mass to the rear of the harvester than the fork-shaped shovel. These DEM soil–crop models are reliable for evaluating other root-tuber harvesting tools.
Adjusting tillage parameters according to soil conditions can reduce energy consumption. In this study, the working parameters and soil physical parameters of plowing were determined using a designed electric suspension platform and soil instrument. The soil conditions were classified into three physical states, namely ‘hard’, ‘zero’, and ‘soft’ using a fuzzy C-means clustering algorithm, taking the soil moisture content and cone penetration resistance as the grading indexes. The Takagi–Sugeno (T–S) fuzzy neural network classifier was constructed using traction resistance, operating velocity, and plowing depth as inputs to indirectly identify the soil’s physical state. The results show that when 280 groups of test data were used to verify the model, 264 groups were correctly identified, indicating a soil physical state identification accuracy of 94.29%. The T–S fuzzy neural network prediction model can achieve the real-time and accurate physical state identification of paddy soil during plowing.
30 January 2026 in Computers and Electronics in Agriculture