Accurately predicting permeability is important to elucidate the fluid mobility and development potential of tight reservoirs. However, for tight sandstones with the same porosity, permeability can change by nearly three orders of magnitude, which greatly increases the difficulty of permeability prediction. In this paper, we performed casting thin section, scanning electron microscopy and high-pressure mercury injection experiments to analyze the influence of pore structure parameters and fractal dimensions on the permeability of Chang 7 tight sandstones. Furthermore, the key parameters affecting the permeability were optimized, and a new permeability prediction model was established. The results show that the pore throat structure of Chang 7 tight sandstone exhibits three-stage fractal characteristics. Thus, the pore throat structure was divided into large pore throat, medium pore throat and small pore throat. The large pore throat reflects the microfracture system, whose fractal dimension was distributed above 2.99, indicating that the heterogeneity of the large pore throat was the strongest. The medium pore throat is dominated by the conventional pore throat system, and its fractal dimension ranged from 2.378 to 2.997. Small pore throats are mainly composed of the tree-shaped pore throat system, and its fractal dimension varied from 2.652 to 2.870. The medium pore throat volume and its fractal dimension were key factors affecting the permeability of Chang 7 tight sandstones. A new permeability prediction model was established based on the medium pore throat volume and its fractal dimension. Compared to other models, the prediction results of the new model are the best according to the analysis of root mean square value, average absolute percentage error and correlation coefficient. These results indicate that the permeability of tight sandstones can be accurately predicted using mesopore throat volume and fractal dimension.

Establishing a suitable classification and evaluation scheme is crucial for sweet spot prediction and efficient development of shale oil in the Chang 7_1-2 sub-member of the Longdong area. In this paper, a series of experiments, such as casting thin sections (CTS), scanning electron microscopy (SEM), low-temperature nitrogen adsorption (LTNA), high-pressure mercury intrusion porosimetry (HMIP), and nuclear magnetic resonance (NMR), were integrated to classify the pore throats and shale oil reservoirs in the study area. Moreover, the pore structure characteristics of different types of reservoirs and their contributions to productivity were revealed. The results show that the pore-throat system can be divided into four parts: large pore throats (>0.2 μm), medium pore throats (0.08~0.2 μm), small pore throats (0.03~0.08 μm), and micropore throats ( 0.1 mD), type II (Φ ≥ 8%, 0.05 mD < K < 0.1 mD), type III (Φ ≥ 5%, 0.02 mD < K < 0.05 mD) and type IV (Φ < 5% or K < 0.02 mD). From type I to IV reservoirs, the proportion of dissolved pores and intergranular pores gradually decreases, and the proportion of intercrystalline pores increases. The proportion of large pore throats gradually decreases, and the proportions of medium pore throats and small pore throats increase initially and then decrease, while the proportion of micropore throats increases successively. The NMR pore size distribution changes from the right peak to the left peak. The developed section of the type I reservoir corresponds to the oil layer, and the developed section of the type I and II reservoirs corresponds to the poor oil layer. In contrast, the developed section of the type III and IV reservoirs corresponds to the dry layer. The daily production from single wells is primarily attributable to type I and II reservoirs.

Accurate permeability characterization is essential for evaluating shale oil reservoirs quality. Chang 7 shale oil reservoirs, with diverse lithologies, low porosities and permeabilities, complex pore structures, and strong heterogeneity, pose challenges for traditional permeability prediction methods. This paper proposes an improved method that integrates lithology and hydraulic flow units (HFUs) with conventional logs for enhanced permeability prediction. The reservoir characteristics of the Chang 7 member in the Sai 392 area were analyzed, investigating relationships among lithology, porosity, pore structure parameters, and permeability. Lithology was identified by combining imaging logging and lithologic reconstruction curves (I_lith), with I_lith value boundaries of − 0.5, 1.5, and 3 for fine sandstone, argillaceous siltstone, silty mudstone, and mudstone, respectively. A back-propagation neural network predicted the flow zone index using lithological evaluation parameters and logging data, enabling HFU dentification and permeability model establishment. In this case study, the improved method was successfully implemented to accurately predict the permeability of the Chang 7 member shale oil reservoirs. Almost all data in the crossplot of the predicted versus measured permeability are within ± 0.17 uncertainty boundaries, with a root mean square error lower than 0.051. The results demonstrate that the improved method can effectively and accurately predict the permeability of the Chang 7 member shale oil reservoirs in the Sai 392 area.

Organic geochemistry experiments, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), N₂ adsorption, CO₂ adsorption, and two-dimensional nuclear magnetic resonance (2D NMR) were performed on ten Chang 7 shale samples (Longdong area, Ordos Basin) to elucidate their pore structure and the characteristics of oil occurrence. Moreover, the factors influencing free oil were discussed, and an occurrence model was established. FE-SEM analysis reveals that the pore types include interparticle pores, intraplatelet pores within clay aggregates, rare fracture pores, and organic matter (OM) pores. The pores are predominantly slit-shaped. The development of micropores was mainly contributed to by OM. Quartz and clay minerals influence the development of macropores and mesopores, feldspar mainly controls macropore development, and pyrite most strongly affects micropore development. Micropores and mesopores constitute the main total pore specific surface area, while mesopores and macropores are the main contributors to the total pore volume. Pores > 2 nm are the main storage spaces for shale oil, and free oil mainly occurs in pores > 20 nm. Adsorbed oil and free oil were assessed by NMR T₁–T₂ mapping. The adsorbed oil signal intensities range from 7.5–23.4 a.u. per g of rock, and the free oil signal intensities range from 4.4–23.2 a.u. per g of rock. The free oil proportions are 15.9–70.6% (average of 44.2%). The free oil proportion is negatively correlated with the clay mineral content and total organic carbon (TOC) content but positively correlated with the saturated hydrocarbon content and volume of pores > 20 nm. The results of this study could help optimize favorable shale oil target areas.

The pore structure and its heterogeneity of tight reservoirs are key factors affecting the storage and percolation of crude oil. The pore system of Chang 7 tight sandstone has multi-scale and multi-type characteristics. However, the contribution of different pore types and pore sizes to the physical properties of Chang 7 tight sandstone is still unclear. In this paper, we collected a suite of Chang 7 tight sandstones to investigate the full-scale pore structure and fractal characteristics by casting thin section, field emission scanning electron microscope, two-dimensional multi-scale backscattered scanning electron microscopy, N₂ adsorption (NA) and NMR. The pore diameters of Chang 7 tight sandstone are usually distributed between 0.001 and 20 μm. Intercrystalline pores are mainly distuibuted 300 nm), mesopores (mainly 7–300 nm), and micropores (mainly 12×10⁻³ mL/g, the continuous percolation network consists entirely of macropores, resulting in higher porosity and permeability of the reservoir. Moreover, reservoir physical properties show excellent correlation with macropore heterogeneity. These results demonstrate that the content and heterogeneity of macropores are key indicators indicating the quality of the Chang 7 tight sandstones.

The pore structure and its complexity play a critical role in fluid migration and recovery efficiency. Multiple pore types, broad pore size distribution (PSD), and extremely irregular pore morphology hinder the comprehensive investigation of pore systems and their complexity in low-permeability conglomerates. In this study, the multi-scale pore system and fractal characteristics of the Permian Lower Wuerhe Formation and Triassic Baikouquan Formation conglomerates from the Junggar Basin were investigated, combining physical property analysis, casting thin sections, scanning electron microscopy, and Nuclear magnetic resonance (NMR). The results show that the pore system of conglomerates consists of residual intergranular pores (RIPs), dissolution pores (DPs), clay-related pores (CRPs), and microfractures. Three types of PSD were identified according to the shape of the T₂ spectrum. Based on the fractal characteristics derived from NMR data, pore systems in conglomerates were divided into macropores (mainly RIPs and DPs), mesopores (mainly CRPs), and micropores (reflect adsorption spaces). The fractal dimension of macropores (D3) increases with the increase of clay mineral content and the decrease of contents of quartz and feldspar. Moreover, the volume of macropores decreases with the increase of clay mineral content and the decrease of contents of quartz and feldspar. In addition, the fractal dimensions and volumes of mesopores and micropores have no obvious relationship with mineral composition. D3 and macropore volume control the physical properties and fluid mobility of conglomerates. T_2,gm shows a strong negative correlation with D3 and macropore volume. Meanwhile, the high value of D3 would reduce the volume of macropores. These results demonstrate that D3 is a good indicator to reveal the quality of pore structure in low-permeability conglomerates.