Structural damage detection by non-destructive techniques has been investigated widely by researchers in recent years, and several response-based Structural Health monitoring techniques have been developed. In this paper, a vibration-based damage detection algorithm through model updating utilizing incomplete frequency response function and modal data is presented. First, a modified sensitivity equation is presented to relate the changes of mode shapes to the changes of unknown structural parameters. Then, the developed equations are used to correlate changes of frequency response functions to the changes of structural parameters. Parameter estimation is conducted through least square solution of sensitivity equations. In order to prove the capability of the proposed method for structural damage detection purpose, a numerical example using error contaminated data is presented. Results exhibit robustness of method against measurement and mass modeling errors.
An experimental verification of a parameter estimation algorithm for finite-element (FE) model updating for damage quantification of a concrete beam with extensive damage is presented using the measured frequency response function (FRF) data. The intact stage of the beam and four progressive damage stages are investigated to update the FE model to quantify the damage across the beam. The method uses a subset of measured FRF data for FE model updating via a quasi-linear sensitivity equation of structural response. A least-squares algorithm with an appropriate weighting technique is used for parameter estimation. Proper selection of excitation frequency ranges for model updating is addressed. Predicted equivalent stiffnesses demonstrate the success and robustness of the method in damage quantification, even when using only a subset of the measured FRF data.