Asphaltene deposition is one of the most serious problems, which usually occurs in oil wells, petroleum production, oil processing, and transportation facilities. Deposition of heavy organic components, especially asphaltene, can lead to wellbore blockage and impacts well economics due to reduction in oil production. Therefore, it is necessary to pay more attention to finding some solution to overcome this problem. In this study, a pipe-loop apparatus for investigation of oil stability was employed to measure deposition thickness using a thermal method. The effects of many factors such as oil type, oil temperature, oil velocity, inhibitors, and solvents on asphaltene deposition were investigated. The results showed that the deposition increased with the increasing value of the colloidal instability index. Besides, the deposition thickness increased with the decreasing velocity of oil, but did not change with oil temperature. In addition, n-heptane could result in more deposition; however, toluene had no effect on the deposition. Branched dodecyl benzene sulfonic acid (Branched DBSA) and Linear DBSA as inhibitors decreased the rate of asphaltene deposition.
28 November 2017 in Inorganic and Nano-Metal Chemistry
In this study, modified nano- boehmite was synthesized with Bismuth and used to adsorb of methylene blue dye solution. Identify the adsorbents synthesized by SEM, FTIR, XRD, TEM and BET have been conducted. The effect of experimental parameters pH, contact time, temperature and initial concentration were studied on adsorption. Results indicated that pH optimum at 25°C is 7 and adsorption reaches equilibrium after 30 minutes. The optimum adsorbent amount is 0.01 g. The results indicated that the equilibrium data were perfectly represented by the Langmuir isotherm and the adsorption behavior can be better described by pseudo-second-order model.