Texture evolution governs many of the physical, chemical, and mechanical properties of polycrystalline materials, but texture models have only been tested on the macroscopic level, which makes it hard to distinguish between approaches that are conceptually very different. Here, we present a universal method for providing data on the underlying structural dynamics at the grain and subgrain level. The method is based on diffraction with focused hard x-rays. First results relate to the tensile deformation of pure aluminum. Experimental grain rotations are inconsistent with the classical Taylor and Sachs models.
To clarify the effect of grain orientation on the evolution of dislocation structures in metals of medium-to-high stacking fault energy, detailed TEM characterization of structures was carried out for more than 350 individual grains in Al and Cu deformed in tension or by cold rolling up to moderate strain levels (ϵvM ≤ 0.8). Efforts were made to obtain a precise description of the three-dimensional arrangement of the dislocation structures and to determine the crystallographic plane of extended dislocation boundaries (geometrically necessary boundaries). A universal pattern of structural evolution characterized by a formation of three types of structure was found in both metals, irrespective of material parameters (stacking fault energy, grain size and impurity) and deformation conditions (deformation mode, strain and strain rate). The key parameter controlling the formation of the different structural types was found to be grain orientation with respect to the deformation axis (axes) and a clear relationship between the structural type and the grain orientation was established. A review of single crystal data shows a similar relationship. The grain orientation dependence of the structural type and similar structural types observed in tension and rolling suggest a common cause. Part II explores this by relating the structural types to the active slip systems.
Part I established, via extensive transmission electron microscopy investigations, that the type of dislocation structure formed in metals of medium-to-high stacking fault energy upon deformation in tension or rolling to moderate strain levels (≤0.8) depends strongly on crystallographic grain orientation. This paper analyzes the grain orientation-dependent structures in terms of the active slip systems, focusing on the crystallographic plane of extended planar boundaries (geometrically necessary boundaries). The analysis establishes slip systems as the factor controlling the dislocation structure. Five fundamental slip classes, consisting of one to three active slip systems, have been identified. Multiple activation of these slip classes is also considered. The slip classes give rise to different types of dislocation structure, of which all except one contains geometrically necessary planar boundaries aligning with unique crystallographic planes (not necessarily slip planes). A slip class leads to the same type of structure, irrespective of the macroscopic deformation mode, as also demonstrated by successful predictions for shear deformation.
1 October 2012 in Materials Science and Technology
The influence of the hardness of martensite and ferrite phases in dual phase steel on void formation has been investigated by in situ tensile loading in a scanning electron microscope. Microstructural observations have shown that most voids form in martensite by evolving four steps: plastic deformation of martensite, crack initiation at the martensite/ferrite interface, crack propagation leading to fracture of martensite particles and void formation by separation of particle fragments. It has been identified that the hardness effect is associated with the following aspects: strain partitioning between martensite and ferrite, strain localisation and critical strain required for void formation. Reducing the hardness difference between martensite and ferrite phases by tempering has been shown to be an effective approach to retard the void formation in martensite and thereby is expected to improve the formability.