The energy dissipation bar has been proven to be an effective way to improve the lateral strength and the seismic capacity of the precast segmental bridge column. To date, however, investigations on how the main design parameters affect the residual drift of such bridge columns are quite limited. Focusing on this research gap, a novel numerical simulation method was proposed in this article to investigate the influencing factors of residual drift of precast segmental bridge columns with energy dissipation bars. First, the refined fiber element model was developed based on the OpenSees software package, considering the bond slip phenomenon at the column end and the boundary condition at the interface between the two adjacent segments. Then, the proposed numerical model was validated by comparing the simulated hysteretic behavior of the precast segmental bridge columns with available experimental data. After that, cyclic analyses were performed on 288 precast segmental bridge column models with different design parameters. Four important influencing factors were investigated, including the post-tensioning force, gravity load, energy dissipation bar ratio, and shear span ratio. According to the analysis results, some suggestions were provided for the practical design procedure of the energy dissipation bar reinforced precast segmental bridge columns.
To increase the durability and seismic resilience of coastal bridges, a hybrid reinforced concrete (HRC) bridge that incorporates both glass fiber-reinforced polymer (GFRP) bars and steel bars is proposed. The time-dependent seismic performance of the HRC bridge is comprehensively investigated at three levels, namely the material, bridge column and bridge structure levels. First, the decrease of tensile strength of GFRP bars over time is analyzed based on the Arrhenius theory, and corrosion initiation time and performance deterioration of steel bars are determined by Fick’s second law and an empirical formula. Second, an efficient finite element modeling method for aging HRC bridge columns is proposed. Simulation of the compression/tension behavior and the fracture failure of the GFRP bar is described. Hysteretic analysis is further conducted to investigate the time-dependent energy dissipation, ductility, residual displacement, bearing capacity and post-yield stiffness ratio. Meanwhile, comparisons of HRC bridge columns to reinforced concrete (RC) references are provided. Third, the seismic demand and damage evolution of deteriorated HRC bridge structures are investigated through dynamic time-history analysis. The results indicate that the corrosion-resistant GFRP bars contribute to improving the bearing capacity and to reducing the residual displacement of the HRC bridge. With an increase in service time, the seismic damage to the bridge column, abutment and expansion bearing increases, but the damage to fixed bearing decreases. Research results presented herein show that the HRC bridge is a promising alternative structure scheme in the marine environment.