Growing consumer demand for minimally processed foods with high quality and safety standards has gained interest in nonthermal decontamination methods for fruit juices. Cold plasma (CP) has emerged as a promising technology in the food industry, offering numerous advantages, such as safety, versatility, environmental friendliness and efficiency. This review paper provides a comprehensive examination of recent advances in CP application for fruit juice processing, focusing on microbial inactivation and its effect on bioactive components along with the interaction with active plasma species. Additionally, the paper also analyzes variations in operating parame-ters of CP that influence the quality of fruit juices. The data from the existing studies indicated that CP treatment resulted in microbial inactivation ranging from 0.15 to 7.4-log cycles. Additionally, enzymatic activity decreased by up to 54%, antioxidant activity improved by up to 261%, and anthocyanin levels increased by 35%, compared to the control samples. The CP shows promising results in retaining the juice’s physicochemical properties with minimal degradation. However, the scaling up of CP technology commercially is still a challenge. Further experimental studies are required in fruit juice processing for industrial applications to get a better idea for understanding the interactions between plasma active species and juice components.
12 March 2025 in Journal of Food Process Engineering
The present study was conducted for the development of biodegradable film from groundnut shell. Different physico-chemical properties viz. moisture content, ash content, bulk density, true density, cellulose content, hemicelluloses content and lignin content were measured using standard methods. Experiments were conducted to investigate the effects of different process parameters viz. shaker time (6, 12 & 18h), shaker speed (160, 180 & 240rpm) and enzyme concentration (80, 100 & 120mg) on lignin content and drying time (10,20 & 30h), drying temperature (50, 70 & 90◦C), dark or light condition (-1, 0 &1) on cellulose content, lignin content and moisture content on the composition of groundnut shell powder. The results of isolation of lignin from groundnut shell powder The optimization of process parameter was done using response surface methodology (RSM) design trial version 7 Box- Behnken Technique. The biodegradable film from groundnut shell powder was developed by solution casting method. The three types of films viz. agar powder based, mixture of agar powder and peanut shell powder and mixture of agar powder and cellulose microfiber was developed at optimized conditions. The different physico- mechanical properties of different types of films were measured. The maximum thickness was achieved by the cellulose microfiber-based film. The agar-based film had a minimum thickness of 0.18 mm. The transmittance value of agar film was lesser than that of CMF film and PSP. The CMF film's WS percentage decreased in comparison to that of the other two films. CMF film which is made with cellulose and agar, has a higher tensile strength than the other two films. CMF and PSP films had a higher opacity value than agar films. AG films show less weight loss, and when compared to PSP films, It was observed that PSP loses less weight than CMF film in the soil burial degradation test because lignin was present.