Sang-Rak Sim

Sang-Rak Sim


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
SSSang-Rak Sim
Sang-Rak Sim
DRDongwoo Ryu
Dongwoo Ryu
To prevent drastic climate changes due to global warming, it is necessary to transition to a carbon-neutral society by reducing greenhouse gas emissions in all industrial sectors. This study aimed to develop carbon utilization sequestration technology that uses the concrete slurry water generated during the production of concrete as a new CO2 sink to reduce CO2 emissions from the cement industry. This was achieved by performing supercritical CO2 carbonation by varying the concrete slurry waste (CSW) ratio. The study’s results confirmed that, according to the CSW ratio (5 to 25%), complete carbonation occurred within only 10 min of the reaction at 40 °C and 100 bar.

9 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
YKYoung-Jin Kim
Young-Jin Kim
SSSang-Rak Sim
Sang-Rak Sim
DRDongwoo Ryu
Dongwoo Ryu
Human survival is threatened by the rapid climate change due to global warming caused by the increase in CO2 emissions since the Second Industrial Revolution. This study developed a secondary cement product production technology by replacing cement, a conventional binder, with calcium silicate cement (CSC), i.e., CO2 reactive hardening cement, to reduce CO2 emissions and utilize CO2 from the cement industry, which emits CO2 in large quantities. Results showed that the carbonation depth, compressive strength increase rate, and CO2 sequestration rate increased as the CSC content increased, suggesting that CSC can be applied as a secondary cement product.

29 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
MKMin Sung Kim
Min Sung Kim
SSSang-Rak Sim
Sang-Rak Sim
DRDongwoo Ryu
Dongwoo Ryu
This study aims to develop highly durable, mineral carbonation-based, resource-recycling, secondary cement products based on supercritical carbon dioxide (CO2) curing as part of carbon capture utilization technology that permanently fixes captured CO2. To investigate the basic characteristics of secondary cement products containing concrete sludge waste (CSW) as the main materials after supercritical CO2 curing, the compressive strengths of the paste and mortar (fabricated by using CSW as the main binder), ordinary Portland cement, blast furnace slag powder, and fly ash as admixtures were evaluated to derive the optimal mixture for secondary products. The carbonation curing method that can promote the surface densification (intensive CaCO3 formation) of the hardened body within a short period of time using supercritical CO2 curing was defined as “Lean Carbonation”. The optimal curing conditions were derived by evaluating the compressive strength and durability improvement effects of applying Lean Carbonation to secondary product specimens. As a result of the experiment, for specimens subjected to Lean Carbonation, compressive strength increased by up to 12%, and the carbonation penetration resistance also increased by more than 50%. The optimal conditions for Lean Carbonation used to improve compressive strength and durability were found to be 35 °C, 80 bar, and 1 min.

24 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
SSSang-Rak Sim
Sang-Rak Sim
DRDongwoo Ryu
Dongwoo Ryu
When a concrete structure is exposed to fire, its structural safety is significantly compromised due to the spalling of members and scaling of concrete. In addition, its durability is substantially reduced due to certain chemical changes such as the dehydration of Ca(OH)2, the main hydration product of concrete, and the rehydration of CaO. Therefore, when fire damage occurs to a reinforced concrete (RC) building, rapid diagnosis and evaluation techniques are required for immediate repair and reinforcement, requiring a crucial step of quantitatively determining the heating temperature. This study aims to demonstrate a method of estimating the heating temperature experienced by fire damaged RC buildings. The experiments utilized two short RC column specimens with embedded titanium strips. The discoloration characteristics of titanium at high temperatures provided a quick, accurate, and simple mechanism for the estimation of the heating temperature by depth. Empirical equations were derived to estimate the heating temperature as a function of the discoloration characteristics of titanium. Thereafter, a comparison of this estimated temperature with the actual heating temperature measured using thermocouples revealed an average error of less than 20 °C, thereby demonstrating a significantly good correlation and an extremely high reliability of the proposed method.

23 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
SSSang-Rak Sim
Sang-Rak Sim
DRDongwoo Ryu
Dongwoo Ryu
To prevent drastic climate change due to global warming, it is necessary to transition to a carbon-neutral society by reducing greenhouse gas emissions in all industrial sectors. This study aims to prepare measures to reduce the greenhouse gas in the cement industry, which is a large source of greenhouse gas emissions. The research uses supercritical CO2 carbonation to develop a carbon utilization fixation technology that uses concrete slurry water generated via concrete production as a new CO2 fixation source. Experiments were conducted using this concrete slurry water and supernatant water under different conditions of temperature (40 and 80 °C), pressure (100 and 150 bar), and reaction time (10 and 30 min). The results showed that reaction for 10 min was sufficient for complete carbonation at a sludge solids content of 5%. However, reaction products of supernatant water could not be identified due to the presence of Ca(HCO3)2 as an aqueous solution, warranting further research.

1 June 2026 in Buildings
Verified
Journal Article
Open access
PDF file
SSSang-Rak Sim
Sang-Rak Sim
Low-lime calcium silicate cement develops strength mainly through carbonation curing. However, long curing times can limit precast productivity. This study examined whether recycled coarse aggregates promote carbonation in CSC concrete via porous adhered mortar, which facilitates CO2 transport. Two mixes (CSC replacement 50%, W/B 0.45) were prepared: NCA-CSC50 and RCA-CSC50 (100% NCA replacement). After steam curing, the specimens were carbonated in 20% CO2 at 20 °C and 60% RH for 1–14 days. The carbonation degree was quantified from phenolphthalein-sprayed cross-sections by image binarization, and depth-dependent phase evolution and ITZ changes were assessed by XRD and SEM–EDS. RCA-CSC50 exhibited a higher carbonation degree and coefficient and achieved higher compressive strength, exceeding those of NCA-CSC50 after 3 days. XRD analysis performed after 14 days of carbonation curing revealed that portlandite peaks remained in NCA-CSC50 at depths of 35–50 mm, whereas they were not detected at the same depths in RCA-CSC50, indicating more extensive carbonation penetration in the RCA-containing mixture. This result is consistent with the quantitatively higher carbonation degree and carbonation coefficient of RCA-CSC50 compared with NCA-CSC50. SEM–EDS observations further revealed multiple ITZs around the recycled aggregate. Although the ITZs were not directly quantified as CO2 diffusion paths, their presence is likely associated with the enhanced carbonation observed in RCA-CSC50 by providing additional connected zones for CO2 ingress. These findings suggest that RCA can be considered not only as a recycled aggregate source but also as a potential means of facilitating CO2 transport in carbonation-cured CSC concrete. Furthermore, the combined use of carbonation-reactive binders and recycled aggregates is expected to contribute to the broader application of low-carbon concrete technologies by reducing construction waste and expanding the implementation of CCUS-based approaches.