State Key Laboratory of Luminescent Materials & Devices, Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510000, China
Dr. Xu-Hui Zhu
State Key Laboratory of Luminescent Materials & Devices, Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510000, China
This tutorial review presents some recent developments in the design, synthesis and implementation of organic solution-processable molecular fluorophores for non-doped electroluminescent light-emitting devices. After a brief presentation of the basic principles of operation and main characteristics of electroluminescent devices, some examples of active emitters representative of the main classes of non-doped molecular electrofluorophores will be discussed. Emphasis is placed on the relationships between the molecular structure and the electronic properties of molecular emitters, in which high photoluminescence efficiency, synthetic accessibility and processability are combined by design with additional functions such as hole and/or electron injection and transport.
Perovskite solar cells (PSCs) have demonstrated high power conversion efficiency (PCE) but inferior long-term stability and remarkable hysteresis. To date, the most efficient PSCs have a n–i–p device architecture and use Li-TFSI/t-BP as standard bi-dopants for the hole-transporting layer (HTL). However, such dopants not only induce deleterious effects on stability but also significantly affect the hysteresis of PSCs. Here, we demonstrate that a fluorine-containing hydrophobic Lewis acid dopant (LAD) can be employed as an effective dopant for PTAA to realize an exceptional fill factor of 0.81 and a record PCE as high as 19.01%, the highest value among the ever reported PSCs based on a novel dopant in the HTL, versus 17.77% for the control device with Li-TFSI/t-BP doped PTAA. To the best of our knowledge, this is the first case in which a PSC based on a novel dopant for the HTL shows higher efficiency than a PSC based on the state-of-the-art bi-dopants Li-TFSI/t-BP. Besides, the LAD-based PSC displays lower J–V hysteresis and much better long-term stability of up to 70 days under air exposure without encapsulation. We believe that this work will pave a new avenue for high-efficiency, hysteresis-less and stable PSCs exploring hydrophobic dopants as alternatives to hydrophilic Li-TFSI/t-BP.
We successfully demonstrate a simple approach to printing efficient, inverted organic solar cells (OSCs) with a self-organized charge selective cathode interface layer based on the small-molecule Phen-NaDPO. Different from previous studies, Phen-NaDPO molecules were blended into a polymer/fullerene blend, comprising a low bandgap diketopyrrolopyrrole–quinquethiophene alternating copolymer pDPP5T-2 and phenyl-C61-butyric acid methyl ester (PC61BM), and processed by doctor blading in air. We observed a spontaneous, surface energy driven migration of Phen-NaDPO towards the ZnO interface and a subsequent formation of electron selective and barrier free extraction contacts. In the presence of 0.5 wt% Phen-NaDPO, a PCE of 5.4% was achieved for the inverted device based on an ITO/ZnO cathode. Notably, the photovoltaic performances remained at the same level with increasing the Phen-NaDPO concentration in the active layer from 0.25 to 1 wt%. Furthermore, this approach could be proven to effectively work with other cathodes such as bare ITO and ITO/AZO. The self-organization of Phen-NaDPO through spontaneous vertical phase separation is mainly attributed to its high surface energy and strong interaction with the cathode material. The present results highlight that a self-organized cathode interfacial material processed from a “ternary” active layer is fully compatible with the requirements for roll-to-roll fabrication of inverted organic solar cells.